topic Re: hpe ml 150gen9 Intelligent Provisioning [F10] Prompt Missing in ProLiant Servers (ML,DL,SL)

hpe ml 150gen9 Intelligent Provisioning [F10] Prompt Missing

gajbinkar — Thu, 31 Oct 2024 12:07:02 GMT

Intelligent Provisioning [F10] Prompt Missing

done 2.4 2.60.2.7and2.87 but not working ---?

pls five me solution

Re: hpe ml 150gen9 Intelligent Provisioning [F10] Prompt Missing

TVVJ — Thu, 31 Oct 2024 11:46:42 GMT

Hello,

You may try by clearing the server's NVRAM. This requires the following:

That the server is first powered off,
The power cables removed from the server,
Removing the access panel,
Identifying the "System Maintenance" on the system board,
Setting switch "S6" from the default position of "Off" to "On",
Closing the acccess panel,
Connecting power supplies to the server and powering it on.

Once a message indicates that a system maintenance switch is turned on, reverse the above procedure after the power cable is removed from the server. Then connect the power cable, power on the server and see if it works.

To locate the system maintenance switch, please refer to item 25 on the "System board components" on page 10 of the HPE ProLiant ML150 Gen9 Server User Guide for its location on the system board.

Regards,

Query: hpe ml 150gen9 Intelligent Provisioning [F10] Prompt Missing

support_s — Wed, 06 Nov 2024 09:22:01 GMT

Hello,

Let us know if you were able to resolve the issue.

If you have no further query, and you are satisfied with the answer then kindly mark the topic as Solved so that it is helpful for all community members.

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

Thank you for being a HPE valuable community member.

Re: hpe ml 150gen9 Intelligent Provisioning [F10] Prompt Missing

gajbinkar — Mon, 11 Nov 2024 06:31:51 GMT

@TVVJ

..........not working same issue

give solution pls help me....

Re: hpe ml 150gen9 Intelligent Provisioning [F10] Prompt Missing

TVVJ — Mon, 11 Nov 2024 08:43:09 GMT

Hello,

It appears that more troubleshooting needs to be performed to isolate the issue.

Please contact HPE Support, document all steps performed and the results at the end of each step to help isolate the issue.

Regards,