topic ML110 Gen10 No boot, stalled and no f9 f10 etc access in ProLiant Servers (ML,DL,SL)

ML110 Gen10 No boot, stalled and no f9 f10 etc access

orflyfisher82 — Mon, 11 Nov 2024 23:55:17 GMT

I have a ml110 g10 that stalles during boot. Post takes forever, i mean like 3 hours, and when it finally gets through post it stalls with the f10 selection highlighted, but doesnt do anytthing else. tried removing everything except memory, except one stick, tried multiple different sticks same thing. help?

Re: ML110 Gen10 No boot, stalled and no f9 f10 etc access

TVVJ — Tue, 12 Nov 2024 05:02:27 GMT

Hello,

You may try clearing the server's NVRAM. To do so, you may perform the following steps:
a. Power off the server and remove the power cables from the power supplies.
b. Remove the access panel.
c. Locate the system maintenance switch on the system board. For this, you may review the sticker on the inside of the access panel. Also you may refer to item 20 of the "System board components" diagram on page 102 of the HPE ProLiant ML110 Gen10 Server's Maintenance and Service Guide.
d. Once located, set the system maintenance switch position 6 from default "Off" to "On".
e. Replace the access panel, connect the power cables to the power supplies and power on the server.
f. When a message indicates that the system maintenance switch is powered on and needs to be turned off, then power off the server.
g. Remove the power cables from the power supplies, remove the access panel, reverse the system maintenance switch position 6 from "On" to "Off".
h. Replace the access panel, connect the power cables to the power supplies and power on the server.

If the issue is not resolved, please observe what is the condition to further isolate the issue.

Regards,

Query: ML110 Gen10 No boot, stalled and no f9 f10 etc access

support_s — Fri, 15 Nov 2024 08:06:22 GMT

Hello,

Let us know if you were able to resolve the issue.

If you have no further query, and you are satisfied with the answer then kindly mark the topic as Solved so that it is helpful for all community members.

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

Thank you for being a HPE valuable community member.