topic Re: raid 1 in ProLiant Servers (ML,DL,SL)

raid 1

Dramel87 — Thu, 21 Nov 2024 04:19:42 GMT

Bonjour,

j'ai deux disque dur hot plug en raid 1 (slot 0 et 1)....le premier est défectueux (voyant orange) et je dois le remplacer :

-faut-il que le second disque soit mis sur le slot 0 et le nouveaux sur le slot 1 (système arrêté, bien évidemment) avant de l'allumer ?

-dois-je juste mettre le nouveau dans le slot 0, à chaud (système en cours de fonctionnement) ?

merci de votre réponse

Google Translated:

raid 1
Hello,

I have two hot plug hard drives in raid 1 (slot 0 and 1)....the first one is defective (orange light) and I have to replace it:

-should the second drive be put on slot 0 and the new one on slot 1 (system stopped, of course) before turning it on?

-should I just put the new one in slot 0, hot (system running)?

thank you for your answer

Re: raid 1

TVVJ — Wed, 20 Nov 2024 14:36:51 GMT

Hello,

Before performing any activity, please backup data. First replace the defective drive and allow the RAID array to rebuild. As the drives are hot plug, they may be replaced while they are functioning.

Regards,

Re: raid 1

Cali — Thu, 21 Nov 2024 16:31:23 GMT

You don't tell us about your server and drive model.

Be sure, that the Orange Light is not the "Do not Remove" LED.

https://support.hpe.com/hpesc/public/docDisplay?docId=a00114989en_us&page=GUID-CEAEB4A7-D62F-4219-973A-5C3DF90A515A.html&docLocale=en_US#ariaid-title1

Cali