https://community.hpe.com/t5/hpe-proliant-servers-ml-dl-sl/e60-missing-eisa-boot-problem/m-p/2993837#M19087 Hi:<BR /><BR />I have a Netserver E60 with software RAID1. It's been running fine for the past year until 2 weeks ago, NT4 complainted FT was broken. The primary dirve was not accessible. I was able to boot from the Pri dirve however. The I re-established the mirror by removing the partitions on the shawdowed drive. Once I did that, it automatically removed the EISA partition. I was able to re-create the mirror. The same thing happened again just today and I wasn't able to boot from the shawdow drive with my NT Boot Disk. I modified the boot.ini to "multi(0)disk(0)rdisk(0)partition(1)" and tried this notation later "multi(0)disk(0)rdisk(1)partition(1)", but still no luck. It kept on complaining it's non system disk. When I tried booting directly using the shawdow drive, it just hang with a blinking cursor where the HP utility prompt would be if the EISA exisited. I still can't figure why I can't boot from the shawdow using the boot disk or directly from shawdow drive. Any help is appreciated because I have 2 identical E60 doing the same thing on the same day twice. Thank you very much. Tue, 10 Jun 2003 20:27:20 GMT Kevin Ip 2003-06-10T20:27:20Z https://community.hpe.com/t5/hpe-proliant-servers-ml-dl-sl/e60-missing-eisa-boot-problem/m-p/2993837#M19087 Hi:<BR /><BR />I have a Netserver E60 with software RAID1. It's been running fine for the past year until 2 weeks ago, NT4 complainted FT was broken. The primary dirve was not accessible. I was able to boot from the Pri dirve however. The I re-established the mirror by removing the partitions on the shawdowed drive. Once I did that, it automatically removed the EISA partition. I was able to re-create the mirror. The same thing happened again just today and I wasn't able to boot from the shawdow drive with my NT Boot Disk. I modified the boot.ini to "multi(0)disk(0)rdisk(0)partition(1)" and tried this notation later "multi(0)disk(0)rdisk(1)partition(1)", but still no luck. It kept on complaining it's non system disk. When I tried booting directly using the shawdow drive, it just hang with a blinking cursor where the HP utility prompt would be if the EISA exisited. I still can't figure why I can't boot from the shawdow using the boot disk or directly from shawdow drive. Any help is appreciated because I have 2 identical E60 doing the same thing on the same day twice. Thank you very much. Tue, 10 Jun 2003 20:27:20 GMT https://community.hpe.com/t5/hpe-proliant-servers-ml-dl-sl/e60-missing-eisa-boot-problem/m-p/2993837#M19087 Kevin Ip 2003-06-10T20:27:20Z https://community.hpe.com/t5/hpe-proliant-servers-ml-dl-sl/e60-missing-eisa-boot-problem/m-p/2993838#M19088 Sorry Wrong forum, administrator, please remove this post. Thanks. Tue, 10 Jun 2003 22:21:33 GMT https://community.hpe.com/t5/hpe-proliant-servers-ml-dl-sl/e60-missing-eisa-boot-problem/m-p/2993838#M19088 Kevin Ip 2003-06-10T22:21:33Z