topic Re: HPE iLO Hardware SNMP OIDs in HPE ProLiant Servers (ML,DL,SL)

HPE iLO Hardware SNMP OIDs

vivekraj-a-2308 — Wed, 18 Jun 2025 03:43:12 GMT

Hi team, I am trying to monitor my HP iLO server, but I am not able to find the correct MIB to monitor the hardware health like Power Supply, temperature and fan speed. It would be great if you could let me know the name of the MIB which I can use. My primary requirement is that it should monitor the server and not be dependent on any OS, like IPMI.

Re: HPE iLO Hardware SNMP OIDs

Sahana_S — Mon, 16 Jun 2025 13:18:29 GMT

Hello @vivekraj-a-2308 ,

Please refer to this HPE Systems Insight Manager - MIB Kit

Hope this helps!

Thanks and Regards,
Sahana S

Re: HPE iLO Hardware SNMP OIDs

vivekraj-a-2308 — Mon, 16 Jun 2025 14:25:30 GMT

Hi @sahana

I’ve downloaded the MIB bundle the provided link, but there are many MIB files included and it's a bit unclear which ones are directly relevant for monitoring hardware via SNMP using iLO.

My specific requirement is:

1. I want to monitor hardware health sensors (such as fan, temperature, power supply, etc.) via SNMP walk on the iLO interface.

2. This monitoring must work even if the host operating system is down.

I’m aware of the Redfish API, which provides similar data via HTTP, but in my use case, I need this data via SNMP only.

Could you please confirm:

1. Does HPE iLO (Gen10/Gen11) support hardware monitoring through CPQHLTH-MIB or another MIB?

2. If not, is there an exclusive MIB (specific to iLO) that should be used for this purpose?

3. Is there any official documentation or list of supported SNMP OIDs/MIBs for iLO hardware health monitoring?