https://community.hpe.com/t5/proliant-servers-ml-dl-sl/netelligent-10-100-pci-nic-card-no-module-entry-in-protocol-ini/m-p/3011645#M19654 Jan,<BR /><BR />I have exactly the same problem as you. Did you find an answer?<BR /><BR />John Thu, 24 Jul 2003 07:28:22 GMT John Jacobson 2003-07-24T07:28:22Z https://community.hpe.com/t5/proliant-servers-ml-dl-sl/netelligent-10-100-pci-nic-card-no-module-entry-in-protocol-ini/m-p/3011644#M19653 I downloaded the dos drivers for the netelligent 10/100 pci card and create a network boot disk using norton ghost.<BR />when I boot the system using the disk, the 2 network cards are detected (both netelligent 10/100), but it lists the following below each card: "No module entry in protocol.ini"<BR />this is my protocol.ini file:<BR />[protman]<BR />drivername=PROTMAN$<BR /><BR />[pktdrv]<BR />drivername=PKTDRV$<BR />bindings=nic<BR />intvec=0x60<BR />chainvec=0x66<BR /><BR />[nic]<BR />drivername=NETFLX3$<BR /><BR />any help is appreciated.<BR />this is my server config:<BR />Proliant 5500 with 2 netelligent 10/100 pci network cards.<BR /><BR />thanks,<BR />Jan Tue, 01 Jul 2003 01:52:45 GMT https://community.hpe.com/t5/proliant-servers-ml-dl-sl/netelligent-10-100-pci-nic-card-no-module-entry-in-protocol-ini/m-p/3011644#M19653 Jan Antons_3 2003-07-01T01:52:45Z https://community.hpe.com/t5/proliant-servers-ml-dl-sl/netelligent-10-100-pci-nic-card-no-module-entry-in-protocol-ini/m-p/3011645#M19654 Jan,<BR /><BR />I have exactly the same problem as you. Did you find an answer?<BR /><BR />John Thu, 24 Jul 2003 07:28:22 GMT https://community.hpe.com/t5/proliant-servers-ml-dl-sl/netelligent-10-100-pci-nic-card-no-module-entry-in-protocol-ini/m-p/3011645#M19654 John Jacobson 2003-07-24T07:28:22Z