https://community.hpe.com/t5/proliant-servers-ml-dl-sl/access-ultra3-scsi-bios/m-p/3024822#M20084 oh, sorry. it`s for RiLo Board. :-/ Wed, 16 Jul 2003 09:42:13 GMT Baumgartl Alex 2003-07-16T09:42:13Z https://community.hpe.com/t5/proliant-servers-ml-dl-sl/access-ultra3-scsi-bios/m-p/3024820#M20082 I have a Compaq 64-Bit/66-Mhz single channel <BR />Ultra3 SCSI adapter, how can I get into the SCSI bios to change some settings like transfer rate? (Like how CTRL+A works on adaptec cards) Wed, 16 Jul 2003 00:05:26 GMT https://community.hpe.com/t5/proliant-servers-ml-dl-sl/access-ultra3-scsi-bios/m-p/3024820#M20082 Matt Mascarich 2003-07-16T00:05:26Z https://community.hpe.com/t5/proliant-servers-ml-dl-sl/access-ultra3-scsi-bios/m-p/3024821#M20083 F8 at startup (spinning SCSI) Wed, 16 Jul 2003 09:14:06 GMT https://community.hpe.com/t5/proliant-servers-ml-dl-sl/access-ultra3-scsi-bios/m-p/3024821#M20083 Baumgartl Alex 2003-07-16T09:14:06Z https://community.hpe.com/t5/proliant-servers-ml-dl-sl/access-ultra3-scsi-bios/m-p/3024822#M20084 oh, sorry. it`s for RiLo Board. :-/ Wed, 16 Jul 2003 09:42:13 GMT https://community.hpe.com/t5/proliant-servers-ml-dl-sl/access-ultra3-scsi-bios/m-p/3024822#M20084 Baumgartl Alex 2003-07-16T09:42:13Z https://community.hpe.com/t5/proliant-servers-ml-dl-sl/access-ultra3-scsi-bios/m-p/3024823#M20085 The BIOS settings for this Compaq SCSI board can only be set in the server's BIOS during boot. <BR />Press F9-RBSU for new Proliant models (f.i. ML370G2) or F10-SCU for older ones (f.i. PL3000). <BR />Don't forget to update the server's firmware and SCU if it's an older model otherwise it will not recognize the SCSI adapter.<BR /><BR /><BR /> Thu, 17 Jul 2003 17:21:53 GMT https://community.hpe.com/t5/proliant-servers-ml-dl-sl/access-ultra3-scsi-bios/m-p/3024823#M20085 Gert Luyten 2003-07-17T17:21:53Z