https://community.hpe.com/t5/proliant-servers-ml-dl-sl/6400r-beeps/m-p/3066928#M21456 Well I reseated teh processors and VRMs and now it works again!! Thu, 10 Feb 2005 18:58:43 GMT Tony Karavidas 2005-02-10T18:58:43Z https://community.hpe.com/t5/proliant-servers-ml-dl-sl/6400r-beeps/m-p/3066924#M21452 I am working on a 6400R. It will power on, but not long after, it will give me 2 long beeps. It stays on, but doesn't display any video. I have taken out and reseated the processors, terminators, VRMs, memory sticks, memory board, expansion card with video, serial, and ps2 ports, and the NIC card. I am let to think that the motherboard is the problem. Help. bradlypickerill@hotmail.com Tue, 09 Sep 2003 15:06:46 GMT https://community.hpe.com/t5/proliant-servers-ml-dl-sl/6400r-beeps/m-p/3066924#M21452 Brad Pickerill 2003-09-09T15:06:46Z https://community.hpe.com/t5/proliant-servers-ml-dl-sl/6400r-beeps/m-p/3066925#M21453 The book says to flash the ROM using ROMpaq. Tue, 09 Sep 2003 16:32:52 GMT https://community.hpe.com/t5/proliant-servers-ml-dl-sl/6400r-beeps/m-p/3066925#M21453 Dave Bauhof 2003-09-09T16:32:52Z https://community.hpe.com/t5/proliant-servers-ml-dl-sl/6400r-beeps/m-p/3066926#M21454 I would also try updating with the latest ROMPAQ. If that does not work, bring the server down to its bear minimum... remove any cards that are not necessary for booting, use one processor (unless they are banked) and go down to the minimum memory configuration. If it boots up, put back in one thing at a time. Wed, 10 Sep 2003 01:38:49 GMT https://community.hpe.com/t5/proliant-servers-ml-dl-sl/6400r-beeps/m-p/3066926#M21454 Mike_498 2003-09-10T01:38:49Z https://community.hpe.com/t5/proliant-servers-ml-dl-sl/6400r-beeps/m-p/3066927#M21455 I'm having the same trouble. Can someone identify the meaning of the beeps?? Thu, 10 Feb 2005 17:58:37 GMT https://community.hpe.com/t5/proliant-servers-ml-dl-sl/6400r-beeps/m-p/3066927#M21455 Tony Karavidas 2005-02-10T17:58:37Z https://community.hpe.com/t5/proliant-servers-ml-dl-sl/6400r-beeps/m-p/3066928#M21456 Well I reseated teh processors and VRMs and now it works again!! Thu, 10 Feb 2005 18:58:43 GMT https://community.hpe.com/t5/proliant-servers-ml-dl-sl/6400r-beeps/m-p/3066928#M21456 Tony Karavidas 2005-02-10T18:58:43Z