https://community.hpe.com/t5/proliant-servers-ml-dl-sl/dat-problems/m-p/3077150#M21745 I'm trying to setup an ML 370 G3 with a Smart Array 641 with 3 HDs in RAID 5 and a 20/40 DDS4 HP DAT on the intergrated SCSI ports.<BR />The problem is that with the Smart Array in place I can't see the DAT drive corectly.All it finds are 8 diferent IDs (0-7)but no DAT.<BR />If I remove the Smart Array card the DAT is there and all is OK.<BR />Any advice-ANY- is acceptable.... Wed, 24 Sep 2003 04:11:02 GMT Con Karay 2003-09-24T04:11:02Z https://community.hpe.com/t5/proliant-servers-ml-dl-sl/dat-problems/m-p/3077150#M21745 I'm trying to setup an ML 370 G3 with a Smart Array 641 with 3 HDs in RAID 5 and a 20/40 DDS4 HP DAT on the intergrated SCSI ports.<BR />The problem is that with the Smart Array in place I can't see the DAT drive corectly.All it finds are 8 diferent IDs (0-7)but no DAT.<BR />If I remove the Smart Array card the DAT is there and all is OK.<BR />Any advice-ANY- is acceptable.... Wed, 24 Sep 2003 04:11:02 GMT https://community.hpe.com/t5/proliant-servers-ml-dl-sl/dat-problems/m-p/3077150#M21745 Con Karay 2003-09-24T04:11:02Z https://community.hpe.com/t5/proliant-servers-ml-dl-sl/dat-problems/m-p/3077151#M21746 Hi<BR /><BR />First, you mustn,t plug DAT in Smart Array. This type of SCSI Controller is usually for disk with any type of redundancy.<BR />You must plug on any SCSI Controller. Adaptec 29160 is a good option<BR /><BR />Regards Thu, 25 Sep 2003 10:19:01 GMT https://community.hpe.com/t5/proliant-servers-ml-dl-sl/dat-problems/m-p/3077151#M21746 Jorge Pons 2003-09-25T10:19:01Z