https://community.hpe.com/t5/proliant-servers-ml-dl-sl/hot-plugging-disks/m-p/3203855#M25958 Hello Ralph,<BR />If the hdd has failed then you can pull out the failed disk and replace it with a good drive.<BR /><BR />Regards, Thu, 26 Feb 2004 22:46:29 GMT Sunil Jerath 2004-02-26T22:46:29Z https://community.hpe.com/t5/proliant-servers-ml-dl-sl/hot-plugging-disks/m-p/3203854#M25957 Hi,<BR /><BR />What is the procedure for hot swapping disks on a Prolaint 380 G2 running Sco Openserver 5.0.4 Unix, the server has 4 mirrored disks. Thu, 26 Feb 2004 22:26:26 GMT https://community.hpe.com/t5/proliant-servers-ml-dl-sl/hot-plugging-disks/m-p/3203854#M25957 Ralph Francis 2004-02-26T22:26:26Z https://community.hpe.com/t5/proliant-servers-ml-dl-sl/hot-plugging-disks/m-p/3203855#M25958 Hello Ralph,<BR />If the hdd has failed then you can pull out the failed disk and replace it with a good drive.<BR /><BR />Regards, Thu, 26 Feb 2004 22:46:29 GMT https://community.hpe.com/t5/proliant-servers-ml-dl-sl/hot-plugging-disks/m-p/3203855#M25958 Sunil Jerath 2004-02-26T22:46:29Z https://community.hpe.com/t5/proliant-servers-ml-dl-sl/hot-plugging-disks/m-p/3203856#M25959 Just need to remove the hard disk which has failed and insert the working hard disk..<BR />User will face very slow server response while the RAID is getting rebuild.<BR /><BR />regds<BR />Naveej Fri, 27 Feb 2004 04:05:44 GMT https://community.hpe.com/t5/proliant-servers-ml-dl-sl/hot-plugging-disks/m-p/3203856#M25959 Naveej.K.A 2004-02-27T04:05:44Z