topic Re: 805-Unsupported processor detected in ProLiant Servers (ML,DL,SL)

805-Unsupported processor detected

Marius_14 — Thu, 04 Mar 2004 15:19:05 GMT

We have a ML370 G2 PIII 1266Mhz with 1 processor. Unfortunately, after installing a second processor to this machine I got an error on boot:
805-Unsupported processor detected

Do I need only to upgrade the rompaq or it is something else?
Thanks,
Marius

Re: 805-Unsupported processor detected

Sunil Jerath — Thu, 04 Mar 2004 16:00:07 GMT

Hello Marius,

Please make sure that you have the latest ROM on your system. Remove the second CPU and update the ROM then install the CPU.

When installing a second processor and PPM, the processor must be the same type and speed as the primary processor. Install only the PPM provided in the option kit with your processor.
The Pentium III Slot 1 processor cannot be down-clocked; therefore, all processors must use the same frequency. Compaq does not support mixing processor frequencies.
During POST, each processor and its initialization frequency is displayed. If POST detects processors of unlike frequency, ROM halts the system.

Please let me know how you make out.

Regards,

Re: 805-Unsupported processor detected

Marius_14 — Fri, 05 Mar 2004 07:20:04 GMT

Hi Sunil,

Thank you very much, it works. Everything went very well.
Thanks again,
Marius.

Re: 805-Unsupported processor detected

Nault — Fri, 05 Mar 2004 07:40:48 GMT

How do you resolve you problem? With change the rom-pack? And what is a ppm? Is pre-processor module so is it a key processor (module with no processor for install in slot have nothing?)

Regard

Re: 805-Unsupported processor detected

Marius_14 — Fri, 05 Mar 2004 08:07:55 GMT

First I applied the latest ROM on my system and after the reboot I install the new CPU with the PPM (processor power module) provided in the option kit with the new processor.
Regards,