https://community.hpe.com/t5/proliant-servers-ml-dl-sl/setting-up-compaq-servers-with-out-smartstart-cd/m-p/3238904#M27569 The procedure described there is for 'old' servers which use a system partition.<BR /><BR />It's much easier with the new G2/G3 models since system setup and basic array configuration is in ROM. Sat, 03 Apr 2004 10:25:19 GMT Martin Breidenbach 2004-04-03T10:25:19Z https://community.hpe.com/t5/proliant-servers-ml-dl-sl/setting-up-compaq-servers-with-out-smartstart-cd/m-p/3238903#M27568 hmmm came accross this the other night<BR /><A href="http://www.geocities.com/rlcomp_1999/manual-smartstart.html" target="_blank">http://www.geocities.com/rlcomp_1999/manual-smartstart.html</A><BR />so not sure if really works but try it Sat, 03 Apr 2004 10:15:42 GMT https://community.hpe.com/t5/proliant-servers-ml-dl-sl/setting-up-compaq-servers-with-out-smartstart-cd/m-p/3238903#M27568 Ryan_149 2004-04-03T10:15:42Z https://community.hpe.com/t5/proliant-servers-ml-dl-sl/setting-up-compaq-servers-with-out-smartstart-cd/m-p/3238904#M27569 The procedure described there is for 'old' servers which use a system partition.<BR /><BR />It's much easier with the new G2/G3 models since system setup and basic array configuration is in ROM. Sat, 03 Apr 2004 10:25:19 GMT https://community.hpe.com/t5/proliant-servers-ml-dl-sl/setting-up-compaq-servers-with-out-smartstart-cd/m-p/3238904#M27569 Martin Breidenbach 2004-04-03T10:25:19Z https://community.hpe.com/t5/proliant-servers-ml-dl-sl/setting-up-compaq-servers-with-out-smartstart-cd/m-p/3238905#M27570 <BR />In all new server are coming with <BR />RMSU ( Rom Based Setup Utility )<BR /><BR />Where as for old It was<BR />SCU ( System configuration Utility )<BR />So we need to install of those in system partition of hdd.<BR /><BR />regards,<BR />Prashant S.<BR /><BR /> Wed, 07 Apr 2004 11:25:25 GMT https://community.hpe.com/t5/proliant-servers-ml-dl-sl/setting-up-compaq-servers-with-out-smartstart-cd/m-p/3238905#M27570 Prashant (I am Back) 2004-04-07T11:25:25Z