topic Re: Windows 2003 install on a DL360 G1 hangs at starting windows in ProLiant Servers (ML,DL,SL)

Windows 2003 install on a DL360 G1 hangs at starting windows

Andrew VanSpronsen — Thu, 17 Jun 2004 10:02:49 GMT

Windows 2003 Server install hangs on a DL360 at the screen "setup is starting windows". We updated to the latest bios level but still no luck. Any ideas?

Thanks!
AndrewV

Re: Windows 2003 install on a DL360 G1 hangs at starting windows

WebWalker — Fri, 18 Jun 2004 02:21:58 GMT

Hi Andrew

I think you should consult the compatibility hardware list of the windows 2003 to verify that the whoole system end its component are supported.

Make a great day.

Luca

Re: Windows 2003 install on a DL360 G1 hangs at starting windows

sputnix — Fri, 18 Jun 2004 03:44:38 GMT

Hi Andrew,

I would try to install manuall the OS, I had a similarly problem with a dl380.
You need the newest SmartArray driver from the web on a floppy. Hit F6 during the installation and add the SmartArray driver from the floppy.

andreas

Re: Windows 2003 install on a DL360 G1 hangs at starting windows

Andrew VanSpronsen — Fri, 18 Jun 2004 08:40:41 GMT

The latest Compaq Integrated Array Controller driver is the same version that W2K3 tries to install. I tried anyway but still no luck.

Re: Windows 2003 install on a DL360 G1 hangs at starting windows

Andrew VanSpronsen — Fri, 18 Jun 2004 08:43:38 GMT

I also don't seem to be able to enter the BIOS. I have heard that if the wrong OS is listed that that can cause this sort of behaviour. I don't get a prompt to enter BIOS or even F10 to enter the system partition utilities.

I see this exact behaviour on two DL360 I am trying to build with W2K3

Re: Windows 2003 install on a DL360 G1 hangs at starting windows

sputnix — Fri, 18 Jun 2004 10:00:20 GMT

Maybe IÂ´m wrong, but I have a similarily problem, there is e newer driver available, donÂ´t use the array driver coming with 2003. For my problem, it was the solution!

Have a nice weekend!

andrea

Re: Windows 2003 install on a DL360 G1 hangs at starting windows

e4services — Fri, 18 Jun 2004 13:03:37 GMT

Did the unit have a previous install with the SmartStart CD? That is where the OS selection comes from.
Try starting with clean hard drives. Do a manual install, supply your own drivers from download. Do not use the SmartStart CD

Re: Windows 2003 install on a DL360 G1 hangs at starting windows

SAKET_5 — Sat, 19 Jun 2004 09:27:18 GMT

Hi Andrew,

I personally would try my best to perform a Smart Start assisted OS install.

So, are you using SS7? If so, start fresh by first running the SYSTEM ERASE utility from the smart start CD.

Reboot the server and look for "F9 to enter RBSU" here you should be able to find the OS selection part under "Advanced" menu. Select Windows 2003.

Continue with the OS install. If this doesn't work, then your next step would be to download the SA driver on a floppy, install Win2k3 manually and loading the SA driver at the "F6 to load drivers" part.

See how you go with this,

Regards,

Re: Windows 2003 install on a DL360 G1 hangs at starting windows

Victor_102 — Mon, 28 Jun 2004 06:53:30 GMT

No additional drivers are required. The ones on the Windows 2003 CD are fine.
What you need to do is use an old Smart Start CD v5.X, then carry out a manual installation selecting Windows 2000 as your operating system. Allow the server to carry out all its usual tasks like creating the system partition and configure the array before inserting the 2003 CD when asked for operating system CD.

Good luck

Re: Windows 2003 install on a DL360 G1 hangs at starting windows

Victor_102 — Mon, 28 Jun 2004 06:54:47 GMT

No additional drivers are required. The ones on the Windows 2003 CD are fine.
What you need to do is use an old Smart Start CD v5.X, then carry out a manual installation selecting Windows 2000 as your operating system. Allow the server to carry out all its usual tasks like creating the system partition then configure the array before inserting the 2003 CD when asked for operating system CD.

Good luck

Re: Windows 2003 install on a DL360 G1 hangs at starting windows

tongas — Wed, 02 Feb 2005 18:24:05 GMT

I have the same problem with my DL360, and I download the driver, press F6 but say that I need the oem file. please helpme. the server has the integrated array controller.

Re: Windows 2003 install on a DL360 G1 hangs at starting windows

Vijay_44 — Wed, 02 Feb 2005 21:05:51 GMT

You do not need to press F6, Windows 2003 has native support for the Integrted Smart Array Controller. If it gets stuck at the point where its trying to load windows, it is probably the os selection in the system Configuration; it should be set to Windows 2000, do not select other.

http://h18023.www1.hp.com/support/files/server/us/download/13227.html

Re: Windows 2003 install on a DL360 G1 hangs at starting windows

tongas — Thu, 03 Feb 2005 07:30:55 GMT

My problem is that the driver (downloaded from HP) not contain the file .OEM that needs Windows 2003 to run when I press F6

Re: Windows 2003 install on a DL360 G1 hangs at starting windows

jun07 — Fri, 27 Oct 2006 01:06:02 GMT

hello. maybe you would not need this anymore, but i found the driver and it worked for me
http://h18007.www1.hp.com/support/files/storage/us/download/23395.html

Re: Windows 2003 install on a DL360 G1 hangs at starting windows

PeteH — Sun, 07 Mar 2010 20:34:40 GMT

I found this old post and thought I would add my solution. I have a DL360 G1 that I had loaded SmartStart 5.5 on and then Server 2000. I wanted to upgrade to Server 2003. The automatic setup option on SmartStart 5.5 only allows as far up as Server 2000.

Tried version 7.5.1 of SmartStart. Got the "Not supported on this server" message. Tried SmartStart 5.5 again. Cleared the settings to start over.

But now I tried with the manual option. Make sure you just don't gloss over the HW array setup. I did this and then realized that my 2 SCSI drives were setup outside the array like 2 normal HDDs. Then I had to wipe it again, go back to the manual again, then setup the array with striping as I had it setup before.

Select Windows 2000 as the OS, which really doesn't matter, but you have to select something. When it gets to the OS install, you put in the Server 2003 disks and install like you would as normal. Works like a charm. I am up and running now with Server 2003 and RAID 0. W00t!

Re: Windows 2003 install on a DL360 G1 hangs at starting windows

PeteH — Sun, 07 Mar 2010 20:38:56 GMT

Oh, and no F6 needed for the "3rd party SCSI/Array driver" to complete the install of the OS. Like was said above, Server 2003 has enough SW to cover what is needed in our old Proliant DL360s. I haven't had any trouble yet.

If I do I shall post that later.;-)