topic ML 370 G3 in ProLiant Servers (ML,DL,SL)

ML 370 G3

Rahul Sharma — Tue, 22 Jun 2004 07:26:20 GMT

Hi
On this box i have to

1. Enable Intergrated Light-out

How can i do this. I tried to Press F9 and looked under PCI devices it shows only IRQ'S no where i could find it to enable.
Please help

Thanks in advance

Re: ML 370 G3

SAKET_5 — Tue, 22 Jun 2004 07:48:02 GMT

Hi Rahul,

How do you know that the ilo (integrated lights out) is disabled?

Reboot the server, during POST check for a message which says "press either F5 or F8 to get into Ilo configuration options". enter into this configuration utility, here you can configure IP, networking info etc, create user accounts, etc.

So, have you got an IP assigned to the interface, can you ping it?can you access the iLO via web browser?

could you make it a bit more clear as to what you are trying to do?are you actually trying to enable/activate advanced license pack for the ilo?

please provide more details and we are willing to assist.

hope it helps and don't forget to assign points:)

regards,

Re: ML 370 G3

Rahul Sharma — Tue, 22 Jun 2004 07:54:30 GMT

Hi saket
When the server boots it gives message ILO disabled.
I found something on HP page and i am going to try and see if it works.
Thanks for the help
Rahul