https://community.hpe.com/t5/proliant-servers-ml-dl-sl/pxe-e55-on-dl360g3-trying-to-boot-to-w2k3-ris-server/m-p/3312359#M31623 I'm trying to get a DL360G3 to boot to our RIS server. I have spanning tree turned off on the switch it's connected to, patch cable going to integrated NIC1. I can get desktop computers to boot to the RIS server from the same switch, but the 360G3 won't. I successfully receive a client IP, subnet mask, etc. but instead of being able to press F12 for network boot, I just get the error message:<BR />PXE-E55: ProxyDHCP service did not reply to request on port 4011.<BR /><BR />We've traced network traffic and the correct info gets passed by the RIS and DHCP servers, and I know the RIS server works since I can boot desktop computers successfully using PXE to the RIS server.<BR /><BR />I've updated the NIC firmware per SP23573 but that did not help, boot code is at v2.33 (7781 NIC). Also our DHCP server and RIS server are running on different physical servers, but on the same subnet. DHCP options 60, 66, and 67 are set appropriately.<BR /><BR />Anyone have some insight as to what the problem is? Tue, 22 Jun 2004 16:31:30 GMT Brian Hjelt 2004-06-22T16:31:30Z https://community.hpe.com/t5/proliant-servers-ml-dl-sl/pxe-e55-on-dl360g3-trying-to-boot-to-w2k3-ris-server/m-p/3312359#M31623 I'm trying to get a DL360G3 to boot to our RIS server. I have spanning tree turned off on the switch it's connected to, patch cable going to integrated NIC1. I can get desktop computers to boot to the RIS server from the same switch, but the 360G3 won't. I successfully receive a client IP, subnet mask, etc. but instead of being able to press F12 for network boot, I just get the error message:<BR />PXE-E55: ProxyDHCP service did not reply to request on port 4011.<BR /><BR />We've traced network traffic and the correct info gets passed by the RIS and DHCP servers, and I know the RIS server works since I can boot desktop computers successfully using PXE to the RIS server.<BR /><BR />I've updated the NIC firmware per SP23573 but that did not help, boot code is at v2.33 (7781 NIC). Also our DHCP server and RIS server are running on different physical servers, but on the same subnet. DHCP options 60, 66, and 67 are set appropriately.<BR /><BR />Anyone have some insight as to what the problem is? Tue, 22 Jun 2004 16:31:30 GMT https://community.hpe.com/t5/proliant-servers-ml-dl-sl/pxe-e55-on-dl360g3-trying-to-boot-to-w2k3-ris-server/m-p/3312359#M31623 Brian Hjelt 2004-06-22T16:31:30Z https://community.hpe.com/t5/proliant-servers-ml-dl-sl/pxe-e55-on-dl360g3-trying-to-boot-to-w2k3-ris-server/m-p/3312360#M31624 hi,<BR />we have the same problem.<BR /><BR />christian Fri, 04 Feb 2005 09:47:26 GMT https://community.hpe.com/t5/proliant-servers-ml-dl-sl/pxe-e55-on-dl360g3-trying-to-boot-to-w2k3-ris-server/m-p/3312360#M31624 Christian Mentschik 2005-02-04T09:47:26Z https://community.hpe.com/t5/proliant-servers-ml-dl-sl/pxe-e55-on-dl360g3-trying-to-boot-to-w2k3-ris-server/m-p/3312361#M31625 the problem is with the boot code with 7781. i have same problem. HP is working on boot code fix. for now disable card and use PCI nic after build renable card and run normal. I can't wait for the fix this is killing me. Fri, 04 Feb 2005 16:49:13 GMT https://community.hpe.com/t5/proliant-servers-ml-dl-sl/pxe-e55-on-dl360g3-trying-to-boot-to-w2k3-ris-server/m-p/3312361#M31625 Tad Nall 2005-02-04T16:49:13Z https://community.hpe.com/t5/proliant-servers-ml-dl-sl/pxe-e55-on-dl360g3-trying-to-boot-to-w2k3-ris-server/m-p/3312362#M31626 we deleted the entries in the DHCP-scope (60, 66 and67) because PXE and DHCP are on different servers. we put helper on the router and now it WORKS perfect.<BR /><BR />best regards<BR />christian<BR /> Mon, 14 Feb 2005 07:35:26 GMT https://community.hpe.com/t5/proliant-servers-ml-dl-sl/pxe-e55-on-dl360g3-trying-to-boot-to-w2k3-ris-server/m-p/3312362#M31626 Christian Mentschik 2005-02-14T07:35:26Z https://community.hpe.com/t5/proliant-servers-ml-dl-sl/pxe-e55-on-dl360g3-trying-to-boot-to-w2k3-ris-server/m-p/3312363#M31627 Try changing the NIC from auto to int18h. Wed, 06 Jul 2005 16:02:59 GMT https://community.hpe.com/t5/proliant-servers-ml-dl-sl/pxe-e55-on-dl360g3-trying-to-boot-to-w2k3-ris-server/m-p/3312363#M31627 Bucky J. Koehler 2005-07-06T16:02:59Z https://community.hpe.com/t5/proliant-servers-ml-dl-sl/pxe-e55-on-dl360g3-trying-to-boot-to-w2k3-ris-server/m-p/3312364#M31628 If you are using VLANs a helper IP for the DHCP and one for the PXE boot server is required. Wed, 06 Jul 2005 16:48:55 GMT https://community.hpe.com/t5/proliant-servers-ml-dl-sl/pxe-e55-on-dl360g3-trying-to-boot-to-w2k3-ris-server/m-p/3312364#M31628 Paul_594 2005-07-06T16:48:55Z