https://community.hpe.com/t5/proliant-servers-ml-dl-sl/ilo-riloe-board-question/m-p/3314434#M31733 Thanks a lot, that was just the kind of answer I wanted to see :)<BR /><BR />Iain Fri, 25 Jun 2004 04:13:12 GMT Iain Marshall 2004-06-25T04:13:12Z https://community.hpe.com/t5/proliant-servers-ml-dl-sl/ilo-riloe-board-question/m-p/3314432#M31731 I have an ML370 G3 with integrated ilo, but I was given a riloe II board instead of the ilo advanced pack. Is it possible to disable the ilo and install the full riloe II board ?<BR /><BR />Thanks,<BR />Iain Thu, 24 Jun 2004 08:51:38 GMT https://community.hpe.com/t5/proliant-servers-ml-dl-sl/ilo-riloe-board-question/m-p/3314432#M31731 Iain Marshall 2004-06-24T08:51:38Z https://community.hpe.com/t5/proliant-servers-ml-dl-sl/ilo-riloe-board-question/m-p/3314433#M31732 As long as the iLO firmware is 1.10 or higher ...the iLO will automatically disable itself when it detects the presence of a Riloe II card.<BR />Ed Thu, 24 Jun 2004 11:15:56 GMT https://community.hpe.com/t5/proliant-servers-ml-dl-sl/ilo-riloe-board-question/m-p/3314433#M31732 Ed Cox 2004-06-24T11:15:56Z https://community.hpe.com/t5/proliant-servers-ml-dl-sl/ilo-riloe-board-question/m-p/3314434#M31733 Thanks a lot, that was just the kind of answer I wanted to see :)<BR /><BR />Iain Fri, 25 Jun 2004 04:13:12 GMT https://community.hpe.com/t5/proliant-servers-ml-dl-sl/ilo-riloe-board-question/m-p/3314434#M31733 Iain Marshall 2004-06-25T04:13:12Z