https://community.hpe.com/t5/proliant-servers-ml-dl-sl/scsi/m-p/2494741#M3478 Make sure the 4200 is the first controller - if it's the boot controller. The IDE-CD controller should be next followed by the embedded SCSI. Then try removing the driver for the embedded controller and reinstalling it.<BR /><BR />This is assuming that the tape drive DOES show up during startup (POST). If it doesn't show up them, make sure the embedded controller is still enabled. Mon, 02 Apr 2001 23:00:00 GMT Ayman Altounji 2001-04-02T23:00:00Z https://community.hpe.com/t5/proliant-servers-ml-dl-sl/scsi/m-p/2494740#M3477 After installing smart array 4200 the internal scsi (b) does not want to pick my dlt 40 80 drive? Fri, 16 Feb 2001 00:00:00 GMT https://community.hpe.com/t5/proliant-servers-ml-dl-sl/scsi/m-p/2494740#M3477 Ayman Altounji 2001-02-16T00:00:00Z https://community.hpe.com/t5/proliant-servers-ml-dl-sl/scsi/m-p/2494741#M3478 Make sure the 4200 is the first controller - if it's the boot controller. The IDE-CD controller should be next followed by the embedded SCSI. Then try removing the driver for the embedded controller and reinstalling it.<BR /><BR />This is assuming that the tape drive DOES show up during startup (POST). If it doesn't show up them, make sure the embedded controller is still enabled. Mon, 02 Apr 2001 23:00:00 GMT https://community.hpe.com/t5/proliant-servers-ml-dl-sl/scsi/m-p/2494741#M3478 Ayman Altounji 2001-04-02T23:00:00Z