https://community.hpe.com/t5/proliant-servers-ml-dl-sl/disk-array-upgrade-and-position-change/m-p/3471096#M38842 Hi,<BR />Currently, I have MSA1000 with 10 x 72GB HDD.<BR />Array A (RAID5) on bay 1-8,<BR />Array B (RAID0) on bay 9-10.<BR /><BR />I wish to upgrade Array A to 145GB on bay 1-12, and move the Array B from bay 9-10 to 13-14.<BR /><BR />Is it possible to simply replace the hardisks and move the Array?<BR /><BR />Your help is greatly appreciated. Thanks! Tue, 25 Jan 2005 21:04:14 GMT Daniel Tan_4 2005-01-25T21:04:14Z https://community.hpe.com/t5/proliant-servers-ml-dl-sl/disk-array-upgrade-and-position-change/m-p/3471096#M38842 Hi,<BR />Currently, I have MSA1000 with 10 x 72GB HDD.<BR />Array A (RAID5) on bay 1-8,<BR />Array B (RAID0) on bay 9-10.<BR /><BR />I wish to upgrade Array A to 145GB on bay 1-12, and move the Array B from bay 9-10 to 13-14.<BR /><BR />Is it possible to simply replace the hardisks and move the Array?<BR /><BR />Your help is greatly appreciated. Thanks! Tue, 25 Jan 2005 21:04:14 GMT https://community.hpe.com/t5/proliant-servers-ml-dl-sl/disk-array-upgrade-and-position-change/m-p/3471096#M38842 Daniel Tan_4 2005-01-25T21:04:14Z https://community.hpe.com/t5/proliant-servers-ml-dl-sl/disk-array-upgrade-and-position-change/m-p/3471097#M38843 In normal world easily can be done: Power down system, pull last Mirrored Array, Power up box, and accept lost Array, access to ACU delete failed array, save configuration. Restart ACU and add new drives expand/extend your array. When all done â power box down one more time add mirrored set, accept drive Position has been changed and all done. Once again ACU install Latest Driver and Firmware for Array controller latest. <BR /> Good Luck. <BR /> Wed, 26 Jan 2005 09:23:26 GMT https://community.hpe.com/t5/proliant-servers-ml-dl-sl/disk-array-upgrade-and-position-change/m-p/3471097#M38843 Oleg Koroz 2005-01-26T09:23:26Z