https://community.hpe.com/t5/proliant-servers-ml-dl-sl/question-to-raid-controller/m-p/3484559#M39362 I have an "ML 570 R01" with a broken Raid controller. Is there a way to replace the controller and get the NVRAM configuration in order to maintain the DISK configuration for the raid array? I remember that it was possible on HP LH3000 servers to restore the NVRAM configuration from the disks.<BR /><BR />Kind regards<BR />Christian Sun, 13 Feb 2005 16:06:02 GMT Christian Bieletzki 2005-02-13T16:06:02Z https://community.hpe.com/t5/proliant-servers-ml-dl-sl/question-to-raid-controller/m-p/3484559#M39362 I have an "ML 570 R01" with a broken Raid controller. Is there a way to replace the controller and get the NVRAM configuration in order to maintain the DISK configuration for the raid array? I remember that it was possible on HP LH3000 servers to restore the NVRAM configuration from the disks.<BR /><BR />Kind regards<BR />Christian Sun, 13 Feb 2005 16:06:02 GMT https://community.hpe.com/t5/proliant-servers-ml-dl-sl/question-to-raid-controller/m-p/3484559#M39362 Christian Bieletzki 2005-02-13T16:06:02Z https://community.hpe.com/t5/proliant-servers-ml-dl-sl/question-to-raid-controller/m-p/3484560#M39363 If you lost only controller, you should fine and boot normally after replacement. If you cleared NVRAM you need: <BR /><A href="http://h18007.www1.hp.com/support/files/server/us/download/13227.html" target="_blank">http://h18007.www1.hp.com/support/files/server/us/download/13227.html</A> Create first two diskettes only <BR />verify firmware for array Controller also <BR /> Sun, 13 Feb 2005 21:00:23 GMT https://community.hpe.com/t5/proliant-servers-ml-dl-sl/question-to-raid-controller/m-p/3484560#M39363 Oleg Koroz 2005-02-13T21:00:23Z