https://community.hpe.com/t5/proliant-servers-ml-dl-sl/boot-errors/m-p/2498141#M3957 What hardware do you have installed in this system? This sounds like an error from a NIC or other such card... Mon, 26 Feb 2001 00:00:01 GMT Ayman Altounji 2001-02-26T00:00:01Z https://community.hpe.com/t5/proliant-servers-ml-dl-sl/boot-errors/m-p/2498140#M3956 Here are two error messages that I have been receiving upon bootup. The process freezes during these two errors. <BR /> <BR />First I was getting this message: ERROR: BAD BASE IMAGE CODE. <BR /> <BR />This error occured a few times but I could boot to NT if I tried enough times. <BR /> <BR />Now, I am getting this message: BOOTWARE MODULE NOT FOUND. <BR /> <BR />I have not been able to boot to NT since this started showing up. Any ideas what to look for? Mon, 26 Feb 2001 00:00:00 GMT https://community.hpe.com/t5/proliant-servers-ml-dl-sl/boot-errors/m-p/2498140#M3956 Ayman Altounji 2001-02-26T00:00:00Z https://community.hpe.com/t5/proliant-servers-ml-dl-sl/boot-errors/m-p/2498141#M3957 What hardware do you have installed in this system? This sounds like an error from a NIC or other such card... Mon, 26 Feb 2001 00:00:01 GMT https://community.hpe.com/t5/proliant-servers-ml-dl-sl/boot-errors/m-p/2498141#M3957 Ayman Altounji 2001-02-26T00:00:01Z