https://community.hpe.com/t5/proliant-servers-ml-dl-sl/parallel-port-mode-on-a-proliant-3000/m-p/3492685#M39608 Thank you for your reply KOV, but these options don't allow me to change the parallel port mode to ECP or EPP mode. They only give me the capability to modify DMA, IRQ and adress. Thu, 24 Feb 2005 11:21:17 GMT DUBUC Brice 2005-02-24T11:21:17Z https://community.hpe.com/t5/proliant-servers-ml-dl-sl/parallel-port-mode-on-a-proliant-3000/m-p/3492683#M39606 How can I change the port mode on a Proliant 3000? because I need an ECP/EPP mode to install a CD-RW. Thu, 24 Feb 2005 08:24:45 GMT https://community.hpe.com/t5/proliant-servers-ml-dl-sl/parallel-port-mode-on-a-proliant-3000/m-p/3492683#M39606 DUBUC Brice 2005-02-24T08:24:45Z https://community.hpe.com/t5/proliant-servers-ml-dl-sl/parallel-port-mode-on-a-proliant-3000/m-p/3492684#M39607 When you access to F10 it should gave you option: System configuration, than Configure HW, let it load files, access to Review or Modify HW settings after View and Edit details, find Integrated Interfaces, Parallel try to change from there if it gave options. Thu, 24 Feb 2005 09:16:44 GMT https://community.hpe.com/t5/proliant-servers-ml-dl-sl/parallel-port-mode-on-a-proliant-3000/m-p/3492684#M39607 Oleg Koroz 2005-02-24T09:16:44Z https://community.hpe.com/t5/proliant-servers-ml-dl-sl/parallel-port-mode-on-a-proliant-3000/m-p/3492685#M39608 Thank you for your reply KOV, but these options don't allow me to change the parallel port mode to ECP or EPP mode. They only give me the capability to modify DMA, IRQ and adress. Thu, 24 Feb 2005 11:21:17 GMT https://community.hpe.com/t5/proliant-servers-ml-dl-sl/parallel-port-mode-on-a-proliant-3000/m-p/3492685#M39608 DUBUC Brice 2005-02-24T11:21:17Z