https://community.hpe.com/t5/proliant-servers-ml-dl-sl/dl320-g3-red-hat-and-raid-controller/m-p/3542224#M41616 OK thank's ...<BR /><BR />do you remember of the address where files and instructions may be found...<BR /><BR />I have found 2 rpms called aarich-6...<BR />is it right ?<BR />what is the difference between the 2 (one is said to be for QU3 ... but what is QU3)<BR /><BR />Anyway, I will browse the forum to try to find the previous topic talking about that's<BR /><BR />tank's again Wed, 11 May 2005 08:56:10 GMT Service Informatique_13 2005-05-11T08:56:10Z https://community.hpe.com/t5/proliant-servers-ml-dl-sl/dl320-g3-red-hat-and-raid-controller/m-p/3542222#M41614 I want to install Red Hat ES 3.4 (or higher but no Beta) on a DL320 G3.<BR />And I want to use the RAID Controller (Intel 82801) for RAID-1 (i've got two ATA disks).<BR /><BR />When enabling RAID (via F9), the install program of Red Hat says "No disk found".<BR /><BR />I've tried different things whitout results...<BR />... Anyone got any (successfull) experience ?<BR /><BR />thank's Wed, 11 May 2005 08:32:40 GMT https://community.hpe.com/t5/proliant-servers-ml-dl-sl/dl320-g3-red-hat-and-raid-controller/m-p/3542222#M41614 Service Informatique_13 2005-05-11T08:32:40Z https://community.hpe.com/t5/proliant-servers-ml-dl-sl/dl320-g3-red-hat-and-raid-controller/m-p/3542223#M41615 Hi<BR /><BR />This problem has been discussed in the forum before the reason for this is the redhat by default does not have the driver for the raid controller.<BR />You need to download the raid controller driver from the hp site burn it into a floppy<BR />(instructions are there on the website)<BR />Please Note to use only the release version mentioned since these drivers are tested only with those version.<BR />After you have the driver disk then you need to select the additional driver option during install and once prompted put the floppy in which would sense the harddrive/partition, make sure you have the Array configured before starting the OS install.<BR /><BR />Hoep this helps.<BR /><BR />Rgds<BR /><BR />HGN Wed, 11 May 2005 08:45:14 GMT https://community.hpe.com/t5/proliant-servers-ml-dl-sl/dl320-g3-red-hat-and-raid-controller/m-p/3542223#M41615 HGN 2005-05-11T08:45:14Z https://community.hpe.com/t5/proliant-servers-ml-dl-sl/dl320-g3-red-hat-and-raid-controller/m-p/3542224#M41616 OK thank's ...<BR /><BR />do you remember of the address where files and instructions may be found...<BR /><BR />I have found 2 rpms called aarich-6...<BR />is it right ?<BR />what is the difference between the 2 (one is said to be for QU3 ... but what is QU3)<BR /><BR />Anyway, I will browse the forum to try to find the previous topic talking about that's<BR /><BR />tank's again Wed, 11 May 2005 08:56:10 GMT https://community.hpe.com/t5/proliant-servers-ml-dl-sl/dl320-g3-red-hat-and-raid-controller/m-p/3542224#M41616 Service Informatique_13 2005-05-11T08:56:10Z https://community.hpe.com/t5/proliant-servers-ml-dl-sl/dl320-g3-red-hat-and-raid-controller/m-p/3542225#M41617 I've found end used the following download :<BR />HP Embedded SATA RAID Controller Driver Diskette for Red Hat EL 3 (x86)" version 6.00.075<BR /><BR />after linux dd read the diskette I have -approximatively - the message "no good driver found : select manualy/continue/other disk" <BR />I selected manualy aarich<BR /><BR />Install ontinue, but when reaching the creation of partitions : "No drive found"<BR /><BR />Whats's wrong ???<BR />Any idea ?<BR /> Wed, 11 May 2005 12:08:32 GMT https://community.hpe.com/t5/proliant-servers-ml-dl-sl/dl320-g3-red-hat-and-raid-controller/m-p/3542225#M41617 Service Informatique_13 2005-05-11T12:08:32Z https://community.hpe.com/t5/proliant-servers-ml-dl-sl/dl320-g3-red-hat-and-raid-controller/m-p/3542226#M41618 You did create Logical RAID disk in BIOS, didn't you? Thu, 22 Sep 2005 19:09:18 GMT https://community.hpe.com/t5/proliant-servers-ml-dl-sl/dl320-g3-red-hat-and-raid-controller/m-p/3542226#M41618 Some One_2 2005-09-22T19:09:18Z