topic Re: DL100 Quick Restore problem in ProLiant Servers (ML,DL,SL)

DL100 Quick Restore problem

Jay Gomez — Wed, 08 Jun 2005 05:35:23 GMT

Hi to all,

This is with regards to our HP Proliant DL100 Storage Server which has a problem on the Primary operating system.The problem starts after installing the Windows SP1(which is supposed to be installed after the installation of Service Release 5.4)(result-Blue Screen) .So,We did try to perform a quick restore by attaching a sony USB DVD drive and it was detected on the BIOS set-up but after the HP Quick Restore window appears,a meaasage came out and states that "Failed to Load USB storage device press esc to cancel".
After pressing esc,another window appear stating to press Q to restore factory defaults or E to exit.And after pressing Q a final message appear stating "Quick Restore failed to detect a supported SATA Controller....press R to reboot the system".
What may be the cause of the problem?
I am just wondering coz the Quick restore CD is included in the server package but it wasnt able to detect the SATA controller.
Is it just because the driver of the USB drive wasnt able to load properly? How come it came to a point where the Quick restore window appear?
Hoping for your very kind resolution.

Thanks,
Gomez

Re: DL100 Quick Restore problem

Henry_83 — Thu, 21 Jul 2005 21:12:50 GMT

I've got exactly the same problem, any help?

Re: DL100 Quick Restore problem

Terry Hutchings — Mon, 25 Jul 2005 08:40:00 GMT

I would take a look at the following:
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=PSD_CN0727W

Re: DL100 Quick Restore problem

Carlos García-Angulo — Tue, 26 Jul 2005 05:49:14 GMT

Thanks to Terry, but I am still in the blank. Nothing in the service release notes seems to be related to the problem. Has anybody got this issue solved with that SR?.

Regards

Re: DL100 Quick Restore problem

Ray Wakefield — Tue, 27 Sep 2005 08:25:16 GMT

Hello,

Have you had any luck sorting this issue? I am having the same problem, and following the leads have been unsuccessful as there is no option to install drivers during the quick restore process

Let me know if you can help cheers

Ray
ray.wakefield@basilica.co.uk

Re: DL100 Quick Restore problem

kevin buckingham — Tue, 18 Oct 2005 04:19:55 GMT

Gomez,

Did HP ever sort this one out for you ?? I have the same problem with brand new dl100's, and I'm trying to write the server recovery document, and it doesn't work !

Regards,

Kevin Buckingham.

Re: DL100 Quick Restore problem

Terry Hutchings — Tue, 18 Oct 2005 09:50:03 GMT

What doesn't work? Using a usb dvd drive to restore? Or applying SP1 to SR5.4?

Re: DL100 Quick Restore problem

kevin buckingham — Tue, 18 Oct 2005 10:01:44 GMT

Terry,

it's running the quick restore dvd that fails - you get to the initial splash screen after a reboot,(ie picks up the dvd and runs it OK) then it says failed to load usb storage device. I have tried to find if the usb dvd device should be an hp one, but can't find any info as yet. I also haven't patched the Dl100 yet - will be trying that tomorrow (service release ver 5.5) , then testing the quick restore again.

Regards,

Kevin

Re: DL100 Quick Restore problem

Henry_83 — Wed, 19 Oct 2005 03:53:29 GMT

Hi all,

I have the same problem in Hong Kong before. But the problem was solved by calling HP support Hong Kong Office, and the technical support was carrying a HP DVD rom drive to try and sucessfully restore the system for me. So that the key point for this quick restore problem is using HP DVD drive not another brand name DVD drive.

Regards,

Henry Cho

Re: DL100 Quick Restore problem

William Martin_2 — Mon, 18 Sep 2006 09:13:49 GMT

Has anybody made any progress in resolving this (aside from using a HP DVDROM). My primary OS is messed up, but the quick restore isnt quick and it doesnt restore! I dont want to have to buy a HP DVDROM to find out that only a certain type works. Is there a way of restoring the primary partition from the secondary?

Any help/progress reports/anything really appreciated.