https://community.hpe.com/t5/proliant-servers-ml-dl-sl/error-unable-to-open-the-file-cpqttac-exe/m-p/3634299#M45279 When I tried to configure NIC Teaming on an NT4 TSE server (Compaq 1600). I got this error message : Error: Unable to open the file CPQTTAC.EXE. though I managed to ignore the error and finish the configuration. After restarting the server and checked the NIC Teaming Properties the STATE info is DEGRADED. Now i tried to unistall the 2 NIC cards then install it back and the driver still am getting the above error. I would like to know how am going to fix this issue. As the two NIC cards are identical Compaq Netelligent 10/100 TX( one is embedded and the other is PCI). Is there a workaround so I can make the NIC teaming succesful and the STATE status should be OK.<BR /><BR /><BR />Any advise would be very much appreciated.<BR /><BR />regards,<BR />chris<BR /> Sun, 25 Sep 2005 23:54:56 GMT sirch 2005-09-25T23:54:56Z https://community.hpe.com/t5/proliant-servers-ml-dl-sl/error-unable-to-open-the-file-cpqttac-exe/m-p/3634299#M45279 When I tried to configure NIC Teaming on an NT4 TSE server (Compaq 1600). I got this error message : Error: Unable to open the file CPQTTAC.EXE. though I managed to ignore the error and finish the configuration. After restarting the server and checked the NIC Teaming Properties the STATE info is DEGRADED. Now i tried to unistall the 2 NIC cards then install it back and the driver still am getting the above error. I would like to know how am going to fix this issue. As the two NIC cards are identical Compaq Netelligent 10/100 TX( one is embedded and the other is PCI). Is there a workaround so I can make the NIC teaming succesful and the STATE status should be OK.<BR /><BR /><BR />Any advise would be very much appreciated.<BR /><BR />regards,<BR />chris<BR /> Sun, 25 Sep 2005 23:54:56 GMT https://community.hpe.com/t5/proliant-servers-ml-dl-sl/error-unable-to-open-the-file-cpqttac-exe/m-p/3634299#M45279 sirch 2005-09-25T23:54:56Z https://community.hpe.com/t5/proliant-servers-ml-dl-sl/error-unable-to-open-the-file-cpqttac-exe/m-p/3634300#M45280 Hi,<BR /><BR />Can you download the utility from web again and check again. Are you sure teh setup is fine, it is not corrupted.<BR /><BR />Regards,<BR />Prashant s. Mon, 26 Sep 2005 04:03:01 GMT https://community.hpe.com/t5/proliant-servers-ml-dl-sl/error-unable-to-open-the-file-cpqttac-exe/m-p/3634300#M45280 Prashant (I am Back) 2005-09-26T04:03:01Z