https://community.hpe.com/t5/proliant-servers-ml-dl-sl/bl-p-class-mix-switch-and-patch-interconnects/m-p/3662392#M46694 Not possibly, reason signal backplane - one piece and B designed for redundancy for A Tue, 01 Nov 2005 20:16:47 GMT Oleg Koroz 2005-11-01T20:16:47Z https://community.hpe.com/t5/proliant-servers-ml-dl-sl/bl-p-class-mix-switch-and-patch-interconnects/m-p/3662391#M46693 Is it possible to mix and match switch and patch panel interconnects? I have one shelf with the Cisco GB interconnects and one shelf with the Patch Panel2. I am wondering if I can put the Cisco's in the left slot on both shelves and the Patch Panel2's in the right slot on both shelves? Tue, 01 Nov 2005 20:10:42 GMT https://community.hpe.com/t5/proliant-servers-ml-dl-sl/bl-p-class-mix-switch-and-patch-interconnects/m-p/3662391#M46693 Don Levinson 2005-11-01T20:10:42Z https://community.hpe.com/t5/proliant-servers-ml-dl-sl/bl-p-class-mix-switch-and-patch-interconnects/m-p/3662392#M46694 Not possibly, reason signal backplane - one piece and B designed for redundancy for A Tue, 01 Nov 2005 20:16:47 GMT https://community.hpe.com/t5/proliant-servers-ml-dl-sl/bl-p-class-mix-switch-and-patch-interconnects/m-p/3662392#M46694 Oleg Koroz 2005-11-01T20:16:47Z https://community.hpe.com/t5/proliant-servers-ml-dl-sl/bl-p-class-mix-switch-and-patch-interconnects/m-p/3662393#M46695 <BR /><A href="http://h20000.www2.hp.com/bc/docs/support/SupportManual/c00429271/c00429271.pdf" target="_blank">http://h20000.www2.hp.com/bc/docs/support/SupportManual/c00429271/c00429271.pdf</A> Tue, 01 Nov 2005 20:19:50 GMT https://community.hpe.com/t5/proliant-servers-ml-dl-sl/bl-p-class-mix-switch-and-patch-interconnects/m-p/3662393#M46695 Oleg Koroz 2005-11-01T20:19:50Z