topic Re: Problème with HP SmartArray 641 on ML 350G4 in ProLiant Servers (ML,DL,SL)

Problème with HP SmartArray 641 on ML 350G4

RAFILOBERA Andry — Tue, 17 Jan 2006 02:39:12 GMT

Hi,
We have an ML350G4 bundled with HP SmartArray 641. Sometimes, when trying to reboot the Proliant server, the HP SM641 is'nt detected during boot process.
Sometimes, changing PCI slot resolve problème but, one week after, the SM641 is'nt detected.I already have changed the SM641 but the problem is the same and, yesterday, the new SM641 is'nt detected even if i change it over the four PCI slot.
I need help please.

Andry

Re: Problème with HP SmartArray 641 on ML 350G4

Shameer.V.A — Tue, 17 Jan 2006 06:35:35 GMT

Hi Andry,
Try to upgrade the firmware of your server motherboard to the latest available. This can be because of some buggs in server motherboad firmware.

Regards,

Shameer

Re: Problème with HP SmartArray 641 on ML 350G4

Mahesh Kumar Malik — Tue, 17 Jan 2006 07:53:53 GMT

Hi Andry

You may also try applying latest Service Packs.

Regards
Mahesh

Re: Problème with HP SmartArray 641 on ML 350G4

RAFILOBERA Andry — Tue, 17 Jan 2006 08:35:41 GMT

Hi all,

All of these suggestion are already done when the problem appear the first time :
- Firmware update of the SM641.
- BIOS update of the ML350G4
- Drivers update
- Win 2003 service pack
- HDD firmware updtate.
I also tried to replace with new SM641 and updat the firmware too, but two week later, the problem appear and is the same :
SM641 not detected.
Is a motherboard problem ?

Regards.

Andry

Re: Problème with HP SmartArray 641 on ML 350G4

e4services — Wed, 18 Jan 2006 08:46:05 GMT

You guys. "Try the lastest ROM Pack", "Update the firmware". WHy is this always your canned response.

Andry, can you be more specific on what you describe as "not detected"? Do you simply mean the cards BIOS never loads, that is you do not get the text splash during boot?

Re: Problème with HP SmartArray 641 on ML 350G4

SIVAKUMAR.P — Wed, 18 Jan 2006 10:10:45 GMT

Hi RAFILOBERA Andry,

The MBD I/O-Controller has been failed, because of it's due to intermittent failure.
hence MBD to be replaced and fix The Smart Array 641 Controller (SA-641) is a 64-bit, 133-MHz PCI-X at the proper spec slot,if the problem could be resolved.

by
shiv.P

Re: Problème with HP SmartArray 641 on ML 350G4

RAFILOBERA Andry — Thu, 19 Jan 2006 01:12:58 GMT

Hi all,
- To e4services :
Exact, normally when SA is plugged, SmartArray 641 and number of logical array is showed on screen during boot after internal SCSI initialisation and drive scan.
- To SIVAKUMAR.P :
When you say MDB, is it the ML350 System board ?

Andry

Re: Problème with HP SmartArray 641 on ML 350G4

RAFILOBERA Andry — Thu, 19 Jan 2006 02:13:57 GMT

This morning, during server reboot, an error message is shown :
Slot 5 : SA 641 controller.
1783 : Slot Array controller is in a lockup state due to a hardware configuration faillure (controller is disabled until this problem is resolved).

How to resolve and reenable controller ?

Thanks

Andry

Re: Problème with HP SmartArray 641 on ML 350G4

De Bruyn Michael — Thu, 19 Jan 2006 08:25:18 GMT

Andy,

"Controller in lockup state" usually means your smart controller should be replaced. But i think your original problem is your systemboard... Its a long shot, but i think your systemboard is killing your pci smart controller cards... Let HP replace the systemboard ASAP... and tell them to bring a 641 contoller as well...