topic Re: iLO-card doesn´t register with DNS in ProLiant Servers (ML,DL,SL)

iLO-card doesn´t register with DNS

Johan Fondin — Thu, 19 Jan 2006 08:06:47 GMT

In the iLO web-interface, under Network Settings there´s a choice for "DDNS" (dynamic...) When it is checked it should register automatically one would think.But that doesn´t happen, why doesn´t the iLO register with the DNS?

Re: iLO-card doesn´t register with DNS

Pradeep Prabhakaran — Fri, 20 Jan 2006 02:01:35 GMT

Hi,

The iLO will be properly registered and discovered under the following conditions:

The network contains properly configured WINS and DNS servers and iLO is configured to register with the servers. The DNS servers will then use the WINS servers to resolve the names and IP addresses.
iLO has been active on the network for over 91 hours.
iLO has been active on the network using a previous version of the firmware and then upgraded to Firmware Version 1.40.
Static IP addresses are used and the DNS names have been manually entered into the DNS database.
DNS is being used and DDNS is not being used and the DNS database is being updated manually.

Please refer the following doc for the same:

http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&objectID=PSD_ES030820_CW01

Regards,
Pradeep

Re: iLO-card doesn´t register with DNS

Ruslan — Fri, 20 Jan 2006 02:40:00 GMT

Hi Johan!

There is one more way for creating A record in DNS automatically. If the DHCP server is configured correctly and registering in DNS allowed - the iLO will be registered in DNS.

Re: iLO-card doesn´t register with DNS

Ben Vallance — Fri, 20 Jan 2006 05:19:21 GMT

We had an issue with registering long ILO network names on DNS.

Our names were longer than the netbios limit (15 chars), which stoped the ILO being registered on WINS (which we are not worried about) but also stopped the ILO being registered with DNS.

Under network settings we set "Register With WINS Server: No" and before long the ILO registered correctly with DNS