https://community.hpe.com/t5/proliant-servers-ml-dl-sl/firmware-change-on-lsi22320/m-p/3727430#M49949 hi, <BR /><BR />I must connect to this controller one library plasmon scsi. unfortunately the controller it does not allow the configuration of the sync with the library and the acknowledgment to the start is slowest (15-20 minuteren). exists a modernization of the fw of controller the scsi in order to make modifications the boot? <BR /><BR />thanks<BR /> Tue, 21 Feb 2006 09:12:55 GMT Marco Astegiano 2006-02-21T09:12:55Z https://community.hpe.com/t5/proliant-servers-ml-dl-sl/firmware-change-on-lsi22320/m-p/3727429#M49948 Hi,<BR /><BR />I have a DL 145 G1 with the 64-bit/133MHz Dual Channel SCSI U320 Adapter (a.k.a. LSI 22320-HP), the firmware I have in it is the latest release from HP, version 5.05.18.02, but compared to the firmware on the LSI 22320-R it's really crippled: no usual scsi functionality and no RAID support.<BR /><BR />So I was wondering, has anybody burned this card's flash with the LSI provided image? I really don't care for the "one button tape restore" that HP provides.<BR /><BR />Thanks. Wed, 08 Feb 2006 18:46:15 GMT https://community.hpe.com/t5/proliant-servers-ml-dl-sl/firmware-change-on-lsi22320/m-p/3727429#M49948 Rene Berber 2006-02-08T18:46:15Z https://community.hpe.com/t5/proliant-servers-ml-dl-sl/firmware-change-on-lsi22320/m-p/3727430#M49949 hi, <BR /><BR />I must connect to this controller one library plasmon scsi. unfortunately the controller it does not allow the configuration of the sync with the library and the acknowledgment to the start is slowest (15-20 minuteren). exists a modernization of the fw of controller the scsi in order to make modifications the boot? <BR /><BR />thanks<BR /> Tue, 21 Feb 2006 09:12:55 GMT https://community.hpe.com/t5/proliant-servers-ml-dl-sl/firmware-change-on-lsi22320/m-p/3727430#M49949 Marco Astegiano 2006-02-21T09:12:55Z