https://community.hpe.com/t5/proliant-servers-ml-dl-sl/pl800-seeking-docs-and-an-upgrade-question/m-p/3754169#M51205 I have a late model Proliant 800 with 100 MHz FSB, running dual PII-450 CPUs.<BR /><BR />First, I seem to have misplaced my PDF of the hardware guide (both setup/install or hardware maintenance would be appreciated). The HP appears to steer me toward older 800 docs, with the Pentium Pro CPU. I need the later docs for the Proliant 800.<BR /><BR />Also, I'm looking at upgrading the CPUs. Can I simply plug in one or two Compaq 500, 550 or 600 MHz P-3 CPU and be good to go? Are the voltages the same, that is, will I be able to use the same VRMs? And I also sort of recall that the P3 CPU upgrade requires a heat baffle to help route the internal air flow over the CPU heat sinks. Is that correct, and if so, what is the part #? (One of the reasons I need the PDF docs!)<BR /><BR />Thank you!<BR /><BR />Jim Sat, 18 Mar 2006 13:48:29 GMT James Long_5 2006-03-18T13:48:29Z https://community.hpe.com/t5/proliant-servers-ml-dl-sl/pl800-seeking-docs-and-an-upgrade-question/m-p/3754169#M51205 I have a late model Proliant 800 with 100 MHz FSB, running dual PII-450 CPUs.<BR /><BR />First, I seem to have misplaced my PDF of the hardware guide (both setup/install or hardware maintenance would be appreciated). The HP appears to steer me toward older 800 docs, with the Pentium Pro CPU. I need the later docs for the Proliant 800.<BR /><BR />Also, I'm looking at upgrading the CPUs. Can I simply plug in one or two Compaq 500, 550 or 600 MHz P-3 CPU and be good to go? Are the voltages the same, that is, will I be able to use the same VRMs? And I also sort of recall that the P3 CPU upgrade requires a heat baffle to help route the internal air flow over the CPU heat sinks. Is that correct, and if so, what is the part #? (One of the reasons I need the PDF docs!)<BR /><BR />Thank you!<BR /><BR />Jim Sat, 18 Mar 2006 13:48:29 GMT https://community.hpe.com/t5/proliant-servers-ml-dl-sl/pl800-seeking-docs-and-an-upgrade-question/m-p/3754169#M51205 James Long_5 2006-03-18T13:48:29Z https://community.hpe.com/t5/proliant-servers-ml-dl-sl/pl800-seeking-docs-and-an-upgrade-question/m-p/3754170#M51206 Jim,<BR />Proliant 800 with 100 MHz FSB docs:<BR />search for documents with titles started <BR />"ProLiant 800 Pentium II Servers with 100 MHz GTL ....."<BR /><A href="http://tinyurl.com/f7hmr" target="_blank">http://tinyurl.com/f7hmr</A><BR /><BR />Regarding upgrade -see last question here:<BR /><A href="http://tinyurl.com/e5e7g" target="_blank">http://tinyurl.com/e5e7g</A> Sun, 19 Mar 2006 01:26:58 GMT https://community.hpe.com/t5/proliant-servers-ml-dl-sl/pl800-seeking-docs-and-an-upgrade-question/m-p/3754170#M51206 Igor Karasik 2006-03-19T01:26:58Z