https://community.hpe.com/t5/proliant-servers-ml-dl-sl/replace-dead-server/m-p/3846602#M55932 Thank you very much, it solved my problem, i think this is a new feature because it used not to work in the old servers. Sun, 20 Aug 2006 00:45:40 GMT mohannadz 2006-08-20T00:45:40Z https://community.hpe.com/t5/proliant-servers-ml-dl-sl/replace-dead-server/m-p/3846600#M55930 Dear all,<BR /><BR />I have one DL380 server with a biult-in raid controller and 3 hard disks configured as a mirror and hotspare, unlukily, the mother board of this server go deffected and now it does not show anything on the display when powered on.<BR />Now, i have another stand-by server, how can i move the old hard disks into the new server and recover the raid configuration and got it to work without loosing the data.<BR />operating system is win2003 Sat, 19 Aug 2006 07:56:23 GMT https://community.hpe.com/t5/proliant-servers-ml-dl-sl/replace-dead-server/m-p/3846600#M55930 mohannadz 2006-08-19T07:56:23Z https://community.hpe.com/t5/proliant-servers-ml-dl-sl/replace-dead-server/m-p/3846601#M55931 If you have another identical DL380 server - just move SCSI drives from broken server to new server - RAID configuration stored on SCSI drives, so then you put drives to new server you will have working configuration.<BR />Identical DL380 mean same server generation (for example DL380 G1) and same SmartArray controller.<BR /> Sun, 20 Aug 2006 00:41:01 GMT https://community.hpe.com/t5/proliant-servers-ml-dl-sl/replace-dead-server/m-p/3846601#M55931 Igor Karasik 2006-08-20T00:41:01Z https://community.hpe.com/t5/proliant-servers-ml-dl-sl/replace-dead-server/m-p/3846602#M55932 Thank you very much, it solved my problem, i think this is a new feature because it used not to work in the old servers. Sun, 20 Aug 2006 00:45:40 GMT https://community.hpe.com/t5/proliant-servers-ml-dl-sl/replace-dead-server/m-p/3846602#M55932 mohannadz 2006-08-20T00:45:40Z