topic Re: Question about my server ml110 g2 in ProLiant Servers (ML,DL,SL)

Question about my server ml110 g2

jen.snowball — Sat, 26 Aug 2006 01:33:37 GMT

yesterday I upgrade my cpu to a Pentium 4 670

When it boots it says Pentium 4 3.8 L2 2mb
but it say's it running at 2.8ghZ
Also I added 2gb of DDR 400 2 x1.0Gb 3.0GB total
In windows 2003 server is says that i have 2gb of ram
I also upgrade the system bios to the latest version 2005 dec still same thing

Re: Question about my server ml110 g2

Jerry Lakin — Sat, 26 Aug 2006 18:36:20 GMT

You can download the service guide here :
http://h20000.www2.hp.com/bc/docs/support/SupportManual/c00302239/c00302239.pdf

I see the highest spec processor listed is P4 3.4mhz

Re: Question about my server ml110 g2

jen.snowball — Sun, 27 Aug 2006 00:00:30 GMT

The Intel E7221 Chipset should run till 3.8ghz.The clock generator on the HP Proliant ICS 9541101df has a max of 19X which is the 3.8GHZ (200 X 19 = 3800)
All other motherboards I've seen with this chipset like for this example

http://www.supermicro.com/products/motherboard/P4/E7221/P8SCT.cfm

This board has same chipset.

The Computer sees the 3.0GHZ chip and L2 Cache of 2MB but it has the wrong multiplier of 14X it shouldbe at 19X

Re: Question about my server ml110 g2

jen.snowball — Sun, 27 Aug 2006 00:02:10 GMT

oops typos

The Computer sees the 3.8GHZ chip

Re: Question about my server ml110 g2

jen.snowball — Sun, 27 Aug 2006 01:40:59 GMT

and also this person here had a 3.6GHZ processor in the ML110 G2

http://developer.novell.com/yes/81127.htm

Re: Question about my server ml110 g2

jen.snowball — Sun, 27 Aug 2006 01:43:04 GMT

and HP has it has 3.6

http://h10010.www1.hp.com/wwpc/ca/en/sm/WF04a/12146350-12146352-12146638-12146638-12146640.html