https://community.hpe.com/t5/proliant-servers-ml-dl-sl/intermittent-failure-of-bmc-ilo-in-dl145g2/m-p/3861635#M56905 Hi,<BR /> We are trying to setup a Linux XC cluster with DL385 as head node and few DL145G2 as computing node. During the cluster preparation DL145G2 fails to takeup through ILO and i am unable to see the ILO settings in BIOS and BMC firmware version becomes unknown. When remove the power cable and power on the machines i get back the ILO settings and BMC. I have the latest BIOS(2.16A) and BMC firmware version(1.23) loaded in the machines. <BR /><BR />could anyone suggesst on this?<BR /><BR />Thanks in Advance,<BR /><BR />Ganesh. Wed, 13 Sep 2006 00:21:08 GMT S.P.Ganesh 2006-09-13T00:21:08Z https://community.hpe.com/t5/proliant-servers-ml-dl-sl/intermittent-failure-of-bmc-ilo-in-dl145g2/m-p/3861635#M56905 Hi,<BR /> We are trying to setup a Linux XC cluster with DL385 as head node and few DL145G2 as computing node. During the cluster preparation DL145G2 fails to takeup through ILO and i am unable to see the ILO settings in BIOS and BMC firmware version becomes unknown. When remove the power cable and power on the machines i get back the ILO settings and BMC. I have the latest BIOS(2.16A) and BMC firmware version(1.23) loaded in the machines. <BR /><BR />could anyone suggesst on this?<BR /><BR />Thanks in Advance,<BR /><BR />Ganesh. Wed, 13 Sep 2006 00:21:08 GMT https://community.hpe.com/t5/proliant-servers-ml-dl-sl/intermittent-failure-of-bmc-ilo-in-dl145g2/m-p/3861635#M56905 S.P.Ganesh 2006-09-13T00:21:08Z