topic Re: SIM and blade enclosures in ProLiant Servers (ML,DL,SL)

SIM and blade enclosures

Mark..Casemore — Wed, 13 Sep 2006 10:33:46 GMT

We have a blade enclosure with a BL20 and a couple of BL25 blade servers. Physically, we have 6 blade servers, however, when viewing the enclosure through SIM, it only displays two.

Re: SIM and blade enclosures

Oleg Koroz — Wed, 13 Sep 2006 19:25:12 GMT

SIM release ?
Agents at Servers ?
Enclosure Firmware ?

Re: SIM and blade enclosures

Mark..Casemore — Thu, 14 Sep 2006 05:38:48 GMT

SIM release ?
Agents at Servers ?
Enclosure Firmware ?

SIM release = C.05.00.02.00
Agents = 7.51.0.0
Enclosure Firmware = 2.10

Thanks

Re: SIM and blade enclosures

Oleg Koroz — Fri, 15 Sep 2006 11:53:33 GMT

can you make 2.30 and run discovery or populate Manualy by name if discovery fails ?

Re: SIM and blade enclosures

Albert Austin — Fri, 15 Sep 2006 13:16:42 GMT

Hi,

See this link,

http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=1029392

Albert

Re: SIM and blade enclosures

Mark..Casemore — Wed, 20 Sep 2006 06:51:23 GMT

We had an engineer in on a seperate issue and he flashed the firmware to version 2.30. He also replaced 3 modules on the back of the enclosure (backplanes, can't remember which ones. With all this, still only 2 servers appear. I will try the link next.

Thanks.

Re: SIM and blade enclosures

Rajashekar Chintakunta — Wed, 20 Sep 2006 12:13:08 GMT

Hi Mark,

Try the follwoing and check if this helps:

1) Goto ILO SNMP Settings and assign the IP address of the HP SIM server and the host Server for all Blade ilos.

2) Open the SNMP service properties and in the Traps tab specify the IP address of the HP SIM Server.

Hope this helps.

Re: SIM and blade enclosures

Oleg Koroz — Wed, 20 Sep 2006 13:40:58 GMT

check resolution steps, it might help

http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&objectID=c00709390&jumpid=reg_R1002_USEN

http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&objectID=c00712058

http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=PSD_ES041118_CW01