https://community.hpe.com/t5/proliant-servers-ml-dl-sl/hp-dat40e/m-p/2516403#M5719 I am using Veritas BackupExec 8.5 to backup my Proliant ML370 using a HP SureStore DAT40e. When the backupjob starts its state changes to 'pending' (instead of backing up). I have consulted the knowledge base of Veritas BackupExec. In there I found a document indicating that this might be due to an SCSI error. When I examined the Windows NT Eventlog I noticed an Event ID 5 indicating an 'parity error' on the SCSI bus. This event is created when I try to make a backup/restore/e.d. and at boot-time. When I disconnect the HP SureStore DAT40e I do not get the Event error at boot-time. Maybe someone can help me with this problem... <BR /> <BR />Kind regards, <BR /> <BR />Rick Tiemens <BR />Advisor ICT Solutions <BR />The Netherlands Wed, 11 Apr 2001 23:00:00 GMT Ayman Altounji 2001-04-11T23:00:00Z https://community.hpe.com/t5/proliant-servers-ml-dl-sl/hp-dat40e/m-p/2516403#M5719 I am using Veritas BackupExec 8.5 to backup my Proliant ML370 using a HP SureStore DAT40e. When the backupjob starts its state changes to 'pending' (instead of backing up). I have consulted the knowledge base of Veritas BackupExec. In there I found a document indicating that this might be due to an SCSI error. When I examined the Windows NT Eventlog I noticed an Event ID 5 indicating an 'parity error' on the SCSI bus. This event is created when I try to make a backup/restore/e.d. and at boot-time. When I disconnect the HP SureStore DAT40e I do not get the Event error at boot-time. Maybe someone can help me with this problem... <BR /> <BR />Kind regards, <BR /> <BR />Rick Tiemens <BR />Advisor ICT Solutions <BR />The Netherlands Wed, 11 Apr 2001 23:00:00 GMT https://community.hpe.com/t5/proliant-servers-ml-dl-sl/hp-dat40e/m-p/2516403#M5719 Ayman Altounji 2001-04-11T23:00:00Z