https://community.hpe.com/t5/proliant-servers-ml-dl-sl/rebuild-not-working/m-p/3884139#M58330 I just replaced a drive in an ML530 server and the array indicates it is 'Ready to rebuild', but it's not! The drive has no lights on it at all. When I first plugged it in there was a solid green light on it, now nothing. Systems Management Home Page indicates all drives are healthy, but the Smart Array 6400 Controller shows Logical Drive 2 is Yellow and in the state of 'Ready to rebuild'. I don't get it. Did I miss something? Server is otherwise healthy.<BR />Thank you! Fri, 20 Oct 2006 14:15:15 GMT Kelly Beauchaine 2006-10-20T14:15:15Z https://community.hpe.com/t5/proliant-servers-ml-dl-sl/rebuild-not-working/m-p/3884139#M58330 I just replaced a drive in an ML530 server and the array indicates it is 'Ready to rebuild', but it's not! The drive has no lights on it at all. When I first plugged it in there was a solid green light on it, now nothing. Systems Management Home Page indicates all drives are healthy, but the Smart Array 6400 Controller shows Logical Drive 2 is Yellow and in the state of 'Ready to rebuild'. I don't get it. Did I miss something? Server is otherwise healthy.<BR />Thank you! Fri, 20 Oct 2006 14:15:15 GMT https://community.hpe.com/t5/proliant-servers-ml-dl-sl/rebuild-not-working/m-p/3884139#M58330 Kelly Beauchaine 2006-10-20T14:15:15Z https://community.hpe.com/t5/proliant-servers-ml-dl-sl/rebuild-not-working/m-p/3884140#M58331 updates: firmware for HDD and SA , driver, ACU <BR />power down pull hdd, power box add when recovery mode enabled, refresh ACU <BR /><BR />upload ADU for exam, you might have problem related to second hdd<BR /> <BR /><A href="http://h18023.www1.hp.com/support/files/server/us/index.html" target="_blank">http://h18023.www1.hp.com/support/files/server/us/index.html</A> <BR /> Sat, 21 Oct 2006 11:41:50 GMT https://community.hpe.com/t5/proliant-servers-ml-dl-sl/rebuild-not-working/m-p/3884140#M58331 Oleg Koroz 2006-10-21T11:41:50Z