https://community.hpe.com/t5/proliant-servers-ml-dl-sl/array-6i/m-p/3985069#M63470 Brian, thanks. I remember more choices on earlier DL servers. Thu, 19 Apr 2007 12:53:16 GMT mike_1030 2007-04-19T12:53:16Z https://community.hpe.com/t5/proliant-servers-ml-dl-sl/array-6i/m-p/3985067#M63468 I was trying to change the IRQ for the arrary to something otehr than 5 or 7. Is it possible? Thu, 19 Apr 2007 12:43:18 GMT https://community.hpe.com/t5/proliant-servers-ml-dl-sl/array-6i/m-p/3985067#M63468 mike_1030 2007-04-19T12:43:18Z https://community.hpe.com/t5/proliant-servers-ml-dl-sl/array-6i/m-p/3985068#M63469 Hi Mike,<BR /><BR />Yes it should be possible but you may have to disable the COM1 port (For IRQ4) or USB perhaps to free up an alternative IRQ.<BR /><BR />This can all be done from the Rom Bases Setup Utility (RBSU) by pressing F9 at POST.<BR /><BR />Brian Thu, 19 Apr 2007 12:48:08 GMT https://community.hpe.com/t5/proliant-servers-ml-dl-sl/array-6i/m-p/3985068#M63469 Brian_Murdoch 2007-04-19T12:48:08Z https://community.hpe.com/t5/proliant-servers-ml-dl-sl/array-6i/m-p/3985069#M63470 Brian, thanks. I remember more choices on earlier DL servers. Thu, 19 Apr 2007 12:53:16 GMT https://community.hpe.com/t5/proliant-servers-ml-dl-sl/array-6i/m-p/3985069#M63470 mike_1030 2007-04-19T12:53:16Z