topic Hard Drive speed at ML530 in ProLiant Servers (ML,DL,SL)

Hard Drive speed at ML530

Den26 — Fri, 11 May 2007 04:54:22 GMT

Hello,
I have 2 servers Proliant ML530
First has: Raid 1+2 at SmartArray 641 and speed for reading/writing - 50/9 Mb/s
Second server has: Raid 5 at SmartArray 641 and speed for reading/writing - 50/6 Mb/s
Cache ratio - 100/0% for reading/writing
How I can change cache ration?
Why we have low speed for writing at both servers?

Re: Hard Drive speed at ML530

Mauro Rusignuolo — Fri, 11 May 2007 05:56:12 GMT

write speed depends, also, of the number of HDDs you are using.

in order to change the "cache ratio" in write mode, ... depend if you have installed the optional 64MB of cache with BBWC.

take a look at this link:

http://h18004.www1.hp.com/products/servers/proliantstorage/arraycontrollers/smartarray641/index.html

bye

TJK

Re: Hard Drive speed at ML530

Den26 — Fri, 11 May 2007 06:21:47 GMT

Thanks for information.
But usual IDE drive has 60Mb/s for record.
Why 6 SCSI (10K RPM) in RAID 1+0 has lower speed?
BWWC is additional device for Controller?

Re: Hard Drive speed at ML530

Mauro Rusignuolo — Fri, 11 May 2007 06:35:24 GMT

9 MB/sec it's a very low speed ...
you are right.

Re: Hard Drive speed at ML530

Den26 — Fri, 11 May 2007 06:44:21 GMT

Any ideas how I can improve speed drive?
OS Win2k3, latest driver for controller.

Re: Hard Drive speed at ML530

Mauro Rusignuolo — Fri, 11 May 2007 06:49:10 GMT

no.
not at this moment.
may be someone else may have.

may be there are some others problems on your systems.
may be, also, non direclty connected to your HDDs ...

TJK.