topic Re: ML350 G5 207-Invalid Memory configuration in ProLiant Servers (ML,DL,SL)

ML350 G5 207-Invalid Memory configuration

Steve Goudreau — Thu, 21 Jun 2007 13:25:36 GMT

Situation:

Server comes with 1 512 med DIMM and boots just fine, I take DIMM out put in 2 identical 1 gig DIMMs and I get 207-Invalid Memory configuration. It shows in POST that there is 2048 RAM but still errors and halts. I take out one of the DIMMs and it boots just fine. I have tried 8 different sets of new RAM using both 1 gig sticks and 512 meg stick and this and 2 other servers will only boot with just one stick, all other times it gives the 207 error.

Any ideas?

Re: ML350 G5 207-Invalid Memory configuration

KarloChacon — Thu, 21 Jun 2007 14:19:05 GMT

"FBDIMMs must be installed in pairs within a bank, except in single-FBDIMM mode, which supports a single 512-MB FBDIMM installed in slot 1A. A bank must be populated with two FBDIMMs with identical HP part numbers. "

the spare part has to be 416471-001

just in case check if your using Bank A to put both DIMMs

Bank A -> 1A and 5A

take a look of this page 36
http://h20000.www2.hp.com/bc/docs/support/SupportManual/c00709040/c00709040.pdf

regards

Re: ML350 G5 207-Invalid Memory configuration

Bhavnish — Thu, 21 Jun 2007 22:19:02 GMT

Hi,

Kindly go through the attached doc for memory configuration for ML350 G5.

Memory PN used in ML350 G5 are:

FBDIMM, registered DDR2, 512 GB 416470-001
FBDIMM, registered DDR2, 1 GB* 416471-001
FBDIMM, registered DDR2, 2 GB* 416472-001
FBDIMM, registered DDR2, 4 GB* (only supported on servers with Intel Xeon 53xx processors) 416473-001

Thnx
Bhavnish

Re: ML350 G5 207-Invalid Memory configuration

Bhavnish — Thu, 21 Jun 2007 22:19:42 GMT

Dont forget to assign points if you find your answer.

Re: ML350 G5 207-Invalid Memory configuration

Bhavnish — Thu, 28 Jun 2007 04:50:23 GMT

Its better to assign points if you find the solution.

Thnx

Re: ML350 G5 207-Invalid Memory configuration

Ruboee — Fri, 16 Nov 2007 15:17:47 GMT

The first memory module should be put in the bottom slot (1), the second module should be put in the 5th slot (in a 8 slot machine). Contrary to What Other computer manufacturers do, HP requires the dual memory modules to be set up as the following.
1-5
2-6
3-7
4-8

Re: ML350 G5 207-Invalid Memory configuration

Tarikrp — Thu, 01 Feb 2018 10:51:01 GMT

Very thx, solved my problem!!

Re: ML350 G5 207-Invalid Memory configuration

DylanB — Thu, 07 Jun 2018 18:10:43 GMT

Bonjour, quel chose a tu faite pour trouvée la solution ?

Merci