https://community.hpe.com/t5/proliant-servers-ml-dl-sl/sco-file-system-incompatability/m-p/4025860#M66344 I have a ML370 G3 with2.8GHZ cpu &amp; an old compaq pro 3000, both running SCO openware 5.0.Both systems share a hotplug 36gb drives.Recently I had to replace a suspect cpu in the ml370 which required a rompaq upgrade before it would boot. After the latest rompaq was installed the system booted ok ,but it couldn't mount the hotswap disk.I remade the fs useing newfs &amp; it mounted ok , but when I tried to mount it on the pro 3000 &amp; it panicked. I know the disk is ok because I have another ml370 that can mount drives from the pro 3k. The question is ,does anyone know where I can get hold of an old rompaq so I can put the bios back to the old version? The old version was p28 2003.01.08. Thanks in advance<BR /> Mon, 25 Jun 2007 06:27:30 GMT steve whitehead 2007-06-25T06:27:30Z https://community.hpe.com/t5/proliant-servers-ml-dl-sl/sco-file-system-incompatability/m-p/4025860#M66344 I have a ML370 G3 with2.8GHZ cpu &amp; an old compaq pro 3000, both running SCO openware 5.0.Both systems share a hotplug 36gb drives.Recently I had to replace a suspect cpu in the ml370 which required a rompaq upgrade before it would boot. After the latest rompaq was installed the system booted ok ,but it couldn't mount the hotswap disk.I remade the fs useing newfs &amp; it mounted ok , but when I tried to mount it on the pro 3000 &amp; it panicked. I know the disk is ok because I have another ml370 that can mount drives from the pro 3k. The question is ,does anyone know where I can get hold of an old rompaq so I can put the bios back to the old version? The old version was p28 2003.01.08. Thanks in advance<BR /> Mon, 25 Jun 2007 06:27:30 GMT https://community.hpe.com/t5/proliant-servers-ml-dl-sl/sco-file-system-incompatability/m-p/4025860#M66344 steve whitehead 2007-06-25T06:27:30Z