https://community.hpe.com/t5/proliant-servers-ml-dl-sl/nic-speed-auto-detect/m-p/4049924#M68037 Hi Brendan<BR /><BR /><BR />this is the card that you have?<BR /><BR />Embedded NC7782 PCI-X Gigabit Server Adapter<BR /><BR />did you try the latest firmware?<BR /><A href="http://h18000.www1.hp.com/support/files/server/us/download/27414.html" target="_blank">http://h18000.www1.hp.com/support/files/server/us/download/27414.html</A><BR /><BR />are you geeting any error on integrated Management log or Event Viewer?<BR /><BR />regards Sun, 05 Aug 2007 17:44:25 GMT KarloChacon 2007-08-05T17:44:25Z https://community.hpe.com/t5/proliant-servers-ml-dl-sl/nic-speed-auto-detect/m-p/4049923#M68036 I have a DL380 G4 with a NIC issue. I have set them both to Auto detect the lan speed, the switch (4600) is also set to auto. One NIC picks up the 1000MB connection however the other one thinks the link selects only 100MB. I hae updated the drivers to the latest release. If I force the connection to 1000MB from either the server or switch the connection disables. Any ideas?? Sun, 05 Aug 2007 16:08:11 GMT https://community.hpe.com/t5/proliant-servers-ml-dl-sl/nic-speed-auto-detect/m-p/4049923#M68036 Brendan_25 2007-08-05T16:08:11Z https://community.hpe.com/t5/proliant-servers-ml-dl-sl/nic-speed-auto-detect/m-p/4049924#M68037 Hi Brendan<BR /><BR /><BR />this is the card that you have?<BR /><BR />Embedded NC7782 PCI-X Gigabit Server Adapter<BR /><BR />did you try the latest firmware?<BR /><A href="http://h18000.www1.hp.com/support/files/server/us/download/27414.html" target="_blank">http://h18000.www1.hp.com/support/files/server/us/download/27414.html</A><BR /><BR />are you geeting any error on integrated Management log or Event Viewer?<BR /><BR />regards Sun, 05 Aug 2007 17:44:25 GMT https://community.hpe.com/t5/proliant-servers-ml-dl-sl/nic-speed-auto-detect/m-p/4049924#M68037 KarloChacon 2007-08-05T17:44:25Z