https://community.hpe.com/t5/proliant-servers-ml-dl-sl/smart-array-problem/m-p/2534748#M6851 upgrade the system bios to match the controller bios...ie to the latest...otherwise reflash the controller..it could have been a bad flash Wed, 21 Nov 2001 00:00:00 GMT Mark Cloutier 2001-11-21T00:00:00Z https://community.hpe.com/t5/proliant-servers-ml-dl-sl/smart-array-problem/m-p/2534747#M6850 Having configured a 1500 /P75 as DSL - server, I finally applied the 2.26 bios to the original smart array controller. After that the following message appears during every boot process: <BR /> <BR />1777 Slot 4 Drive Array - Proliant Storage System Problem Detected <BR />SCSI Port 1: Interrupt Signal Inoperative - Check SCSI Cables <BR /> <BR />and the system halts. After pressing F1 WIN98 seems to start normal, although the disk speed seems to be a little slow (OK, it?s only a P75). <BR /> <BR />Changing controllers (all with system revision 2.26), cables or fixed disks did not change anything. <BR /> <BR />Do I have a problem (aside of the necessary user intervention at boot time)? <BR />Do I have to downgrade the Smart Array BIOS? And if, where do I get the necessary old BIOS file? <BR />Or is it some strange hardware problem. <BR /> <BR />Any input is appreciated, thanks in advance Wed, 30 May 2001 23:00:00 GMT https://community.hpe.com/t5/proliant-servers-ml-dl-sl/smart-array-problem/m-p/2534747#M6850 Ayman Altounji 2001-05-30T23:00:00Z https://community.hpe.com/t5/proliant-servers-ml-dl-sl/smart-array-problem/m-p/2534748#M6851 upgrade the system bios to match the controller bios...ie to the latest...otherwise reflash the controller..it could have been a bad flash Wed, 21 Nov 2001 00:00:00 GMT https://community.hpe.com/t5/proliant-servers-ml-dl-sl/smart-array-problem/m-p/2534748#M6851 Mark Cloutier 2001-11-21T00:00:00Z