https://community.hpe.com/t5/proliant-servers-ml-dl-sl/logical-drives-and-windows-2003/m-p/4062412#M68900 I have just installed windows 2003 standard r2 on a DL380 G5.<BR />The drives were configured as <BR />logical drive a - drive 1&amp;2 raid 0/1<BR />logical drive b - drive 5,6,7 as raid5<BR />logical drive c - drive 3,4 raid 0/1.<BR /><BR />Windows was installed in onto logical drive a. Under windows this shows as drive c: and I cannot see any of the other logical drives.<BR />How do I configure/see the other drives?<BR /><BR /> Wed, 29 Aug 2007 09:49:13 GMT Ian Warner 2007-08-29T09:49:13Z https://community.hpe.com/t5/proliant-servers-ml-dl-sl/logical-drives-and-windows-2003/m-p/4062412#M68900 I have just installed windows 2003 standard r2 on a DL380 G5.<BR />The drives were configured as <BR />logical drive a - drive 1&amp;2 raid 0/1<BR />logical drive b - drive 5,6,7 as raid5<BR />logical drive c - drive 3,4 raid 0/1.<BR /><BR />Windows was installed in onto logical drive a. Under windows this shows as drive c: and I cannot see any of the other logical drives.<BR />How do I configure/see the other drives?<BR /><BR /> Wed, 29 Aug 2007 09:49:13 GMT https://community.hpe.com/t5/proliant-servers-ml-dl-sl/logical-drives-and-windows-2003/m-p/4062412#M68900 Ian Warner 2007-08-29T09:49:13Z https://community.hpe.com/t5/proliant-servers-ml-dl-sl/logical-drives-and-windows-2003/m-p/4062413#M68901 Hi Ian,<BR /><BR />Right click on My Computer, and click on Manage. Click on Disk Management and you should hopefully see the two additional logical drives which will be unformatted.<BR /><BR />Select each one in turn, add a partition and format it...<BR /><BR />Hope this helps,<BR /><BR />Regards,<BR /><BR />Rob Wed, 29 Aug 2007 10:06:02 GMT https://community.hpe.com/t5/proliant-servers-ml-dl-sl/logical-drives-and-windows-2003/m-p/4062413#M68901 Rob Leadbeater 2007-08-29T10:06:02Z