topic Re: Proliant ML350 G3 - Error 602 - Diskette Boot Record Error in ProLiant Servers (ML,DL,SL)

Proliant ML350 G3 - Error 602 - Diskette Boot Record Error

IBM Kenobi — Thu, 30 Aug 2007 03:52:08 GMT

I recently connected a SCSI tape drive and rebooted the server.
The tape drive was recognised but after completing the scsi load sequence the HP ethernet boot agent loads and then I received the error 602:
Diskette Boot Record Error

(There is no floppy or cd in the drives).

I have disconnected the scsi tape drive and rebooted but the same error appears and will not go past it.

The HP Ethernet Boot Agent is v3.1.15
HP Ultra 3 Bios.

What is causing the error and how do I correct it?
Thanks for your time.
Mike

Re: Proliant ML350 G3 - Error 602 - Diskette Boot Record Error

KarloChacon — Thu, 30 Aug 2007 04:30:41 GMT

hi IBM

at this point you can cleaning the NVRAM

Procedure (see the attached file to look for the system maintenance switch)

Clean NVRAM (system maintenance switch)

- Power off server, unppluged the power cable.
- Open the server.
- Look for Sistem Maintenance Switch
- Switch number 6, put it ON
- Power on the server.
- leave it for 2 minutes
- Power off the server and plugged the power cable
- Power on the server.

try again

regards

Re: Proliant ML350 G3 - Error 602 - Diskette Boot Record Error

TY 007 — Thu, 30 Aug 2007 04:32:30 GMT

Hello IBM,

Disconnect any USB Hard Drives.

Thanks

Re: Proliant ML350 G3 - Error 602 - Diskette Boot Record Error

TY 007 — Thu, 30 Aug 2007 04:34:04 GMT

Hello IBM,

Disconnect as well other External USB Devices such as UPS connected to the Server via USB Port.

Thanks

Re: Proliant ML350 G3 - Error 602 - Diskette Boot Record Error

IBM Kenobi — Thu, 30 Aug 2007 04:40:39 GMT

Hi, I was using the external usb drive as a temporary backup until the replacement tape drive arrived.
Removing it worked perfectly. Thank you kindly for the quick responses.
I didn't try the first response as removing the USB drive worked so I haven't rated it.

Thank you anyway though.
Mike

Re: Proliant ML350 G3 - Error 602 - Diskette Boot Record Error

TY 007 — Thu, 30 Aug 2007 05:06:47 GMT

Hello IBM,

Additional Information.

The Error could be also caused by LAN Card(s) installed which could be easily resolved by reseat the LAN Card(s) or replace with other LAN Card(s) Model.

Thanks