<?xml version="1.0" encoding="UTF-8"?>
<rss xmlns:content="http://purl.org/rss/1.0/modules/content/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#" xmlns:taxo="http://purl.org/rss/1.0/modules/taxonomy/" version="2.0">
  <channel>
    <title>topic Re: Dl380 G3 - 641 Controller in ProLiant Servers (ML,DL,SL)</title>
    <link>https://community.hpe.com/t5/proliant-servers-ml-dl-sl/dl380-g3-641-controller/m-p/4138565#M74868</link>
    <description>Hope this helps you.&lt;BR /&gt;&lt;BR /&gt;1794-Drive Array - Array Accelerator Battery Charge Low... ...&lt;BR /&gt;Array Accelerator is temporarily disabled. &lt;BR /&gt;&lt;BR /&gt;Array Accelerator will be re-enabled when battery reaches full charge. &lt;BR /&gt;Audible Beeps: None &lt;BR /&gt;Possible Cause: The battery charge is below 75 percent. Posted writes are disabled. &lt;BR /&gt;&lt;BR /&gt;Action: Replace the array accelerator board if the batteries do not recharge within 36 powered-on hours&lt;BR /&gt;&lt;BR /&gt;&lt;BR /&gt;</description>
    <pubDate>Thu, 31 Jan 2008 20:31:31 GMT</pubDate>
    <dc:creator>Raghuarch</dc:creator>
    <dc:date>2008-01-31T20:31:31Z</dc:date>
    <item>
      <title>Dl380 G3 - 641 Controller</title>
      <link>https://community.hpe.com/t5/proliant-servers-ml-dl-sl/dl380-g3-641-controller/m-p/4138564#M74867</link>
      <description>Server Dl380 G3 - 641 Controller&lt;BR /&gt;&lt;BR /&gt;and error 1794 - Array Accelerator Battery Charge Low &lt;BR /&gt;&lt;BR /&gt;- firmware up to date &lt;BR /&gt;- battery was replaced&lt;BR /&gt;- controller was replaced&lt;BR /&gt;&lt;BR /&gt;what next ? issue is still there&lt;BR /&gt;&lt;BR /&gt;regards</description>
      <pubDate>Thu, 31 Jan 2008 19:58:12 GMT</pubDate>
      <guid>https://community.hpe.com/t5/proliant-servers-ml-dl-sl/dl380-g3-641-controller/m-p/4138564#M74867</guid>
      <dc:creator>Capel</dc:creator>
      <dc:date>2008-01-31T19:58:12Z</dc:date>
    </item>
    <item>
      <title>Re: Dl380 G3 - 641 Controller</title>
      <link>https://community.hpe.com/t5/proliant-servers-ml-dl-sl/dl380-g3-641-controller/m-p/4138565#M74868</link>
      <description>Hope this helps you.&lt;BR /&gt;&lt;BR /&gt;1794-Drive Array - Array Accelerator Battery Charge Low... ...&lt;BR /&gt;Array Accelerator is temporarily disabled. &lt;BR /&gt;&lt;BR /&gt;Array Accelerator will be re-enabled when battery reaches full charge. &lt;BR /&gt;Audible Beeps: None &lt;BR /&gt;Possible Cause: The battery charge is below 75 percent. Posted writes are disabled. &lt;BR /&gt;&lt;BR /&gt;Action: Replace the array accelerator board if the batteries do not recharge within 36 powered-on hours&lt;BR /&gt;&lt;BR /&gt;&lt;BR /&gt;</description>
      <pubDate>Thu, 31 Jan 2008 20:31:31 GMT</pubDate>
      <guid>https://community.hpe.com/t5/proliant-servers-ml-dl-sl/dl380-g3-641-controller/m-p/4138565#M74868</guid>
      <dc:creator>Raghuarch</dc:creator>
      <dc:date>2008-01-31T20:31:31Z</dc:date>
    </item>
  </channel>
</rss>

