https://community.hpe.com/t5/hpe-proliant-servers-ml-dl-sl/smart-array-3200-controller/m-p/2551708#M7613 I think I had a similar problem. Try updating the ROMPAQ for the server, and then replace the DLT driver. Both downloads are available on Compaq site... Tue, 17 Jul 2001 23:00:00 GMT Ayman Altounji 2001-07-17T23:00:00Z https://community.hpe.com/t5/hpe-proliant-servers-ml-dl-sl/smart-array-3200-controller/m-p/2551707#M7612 I have a problem with the Smart 3200 controller. The OS of the server is Win NT 4 SP6. There's a 20/40Gb tape drive connected to the Smart array 3200 controller. Backup program is Arcserve 2000. I always get an error message within Arcserve (E6300 Windows NT SCSI Port Error). The event viewer tells me: The driver detected a controller error on \device\Scsiport 3 (source: CPQ32FS2). Compaq SCSI storage agent:SCSI! Tape drive: tape status change slot:0; Port:1; Drive:6 Value:4 != Threshold :2. <BR />After this the tapedrive went into idle status. The only thing left for me to do is to restart the server. <BR /> <BR />Please, I need you assistance for this. Thanks in advance. <BR /> <BR />Axel Wed, 11 Jul 2001 23:00:00 GMT https://community.hpe.com/t5/hpe-proliant-servers-ml-dl-sl/smart-array-3200-controller/m-p/2551707#M7612 Ayman Altounji 2001-07-11T23:00:00Z https://community.hpe.com/t5/hpe-proliant-servers-ml-dl-sl/smart-array-3200-controller/m-p/2551708#M7613 I think I had a similar problem. Try updating the ROMPAQ for the server, and then replace the DLT driver. Both downloads are available on Compaq site... Tue, 17 Jul 2001 23:00:00 GMT https://community.hpe.com/t5/hpe-proliant-servers-ml-dl-sl/smart-array-3200-controller/m-p/2551708#M7613 Ayman Altounji 2001-07-17T23:00:00Z