https://community.hpe.com/t5/hpe-proliant-servers-ml-dl-sl/inserted-hba-problem-with-controller/m-p/4163495#M76812 I inserted Qlogic HBA in one of my DL360 G4P box, after when i powered-on the box, it says "no logical disks found", then i went into controller configuration (by pressing F8), then it says "no physical hard disks are found". Then i observed that in-from of the hard disks, "red" light is displayed.<BR /><BR />But i checked those hard disks in another DL360 G4P box, there is no problem with hard disks, the hard disk is working fine in other boxes. So, i guess some problem smart start controller or some configuration.<BR /><BR />Can any one help me how to troubleshoot this issue ?<BR /><BR /> Tue, 18 Mar 2008 08:58:33 GMT shashi kanth 2008-03-18T08:58:33Z https://community.hpe.com/t5/hpe-proliant-servers-ml-dl-sl/inserted-hba-problem-with-controller/m-p/4163495#M76812 I inserted Qlogic HBA in one of my DL360 G4P box, after when i powered-on the box, it says "no logical disks found", then i went into controller configuration (by pressing F8), then it says "no physical hard disks are found". Then i observed that in-from of the hard disks, "red" light is displayed.<BR /><BR />But i checked those hard disks in another DL360 G4P box, there is no problem with hard disks, the hard disk is working fine in other boxes. So, i guess some problem smart start controller or some configuration.<BR /><BR />Can any one help me how to troubleshoot this issue ?<BR /><BR /> Tue, 18 Mar 2008 08:58:33 GMT https://community.hpe.com/t5/hpe-proliant-servers-ml-dl-sl/inserted-hba-problem-with-controller/m-p/4163495#M76812 shashi kanth 2008-03-18T08:58:33Z