topic Re: DL 585 G2 and Server 2008 in ProLiant Servers (ML,DL,SL)

DL 585 G2 and Server 2008

Christiaan Pretorius — Wed, 16 Apr 2008 05:07:54 GMT

Hi

Please help.I've got a DL 585G2 and installed Server 2008 x64 with SmartStart 8.0

The nics are not showing up in Windows. No nics is device manager. I have checked the BIOS, the nics are their.I have tested the nics and this is definately not a hardware problem.

Please help

Re: DL 585 G2 and Server 2008

KarloChacon — Wed, 16 Apr 2008 06:58:48 GMT

hi Christiaan
after installing W2008 x64 bits did you install Proliant support pack 8.0 too?

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=15351&prodSeriesId=1121516&prodNameId=3288134&swEnvOID=4024&swLang=8&mode=2&taskId=135&swItem=MTX-cee6a8aa43344150a358fd8c84

try that and let us know

regards

Re: DL 585 G2 and Server 2008

Christiaan Pretorius — Wed, 16 Apr 2008 12:44:06 GMT

Did try that no luck!

Any other suggestions?

Re: DL 585 G2 and Server 2008

KarloChacon — Wed, 16 Apr 2008 15:08:44 GMT

hi

what do you mean by this? "I have tested the nics and this is definately not a hardware problem" how did you test them?

what happens if you try this file?
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&swItem=MTX-972cefe4461749b8abc6bbcbfe&jumpid=reg_R1002_USEN
I mean installation is supported? try and let me know

the point there is not more drivers for W2008 the only thing is to try with driver from W2003 x64 bits, if that works we can try previous versions in can the one above can be installed

did you update firmware for the whole server?

regards

Re: DL 585 G2 and Server 2008

Oleg Koroz — Wed, 16 Apr 2008 23:52:29 GMT

use 2003 drivers for x64, if no go use aditional card as 2008 might not see some older cards, i have one server nic is there, but is not in device manager

Re: DL 585 G2 and Server 2008

Christiaan Pretorius — Thu, 17 Apr 2008 08:48:45 GMT

We have installed 2003 server on the server and all working 100%. Thats how I know the hardware is 100%