topic Re: ML350 Failed Disk Error replacing Disk in ProLiant Servers (ML,DL,SL)

ML350 Failed Disk Error replacing Disk

vakantieman — Mon, 19 May 2008 13:47:42 GMT

All,

We have a ML350 with a RAID 5 configuration. The disks are placed in Slot 0,1,2. Last week the Disk in Slot 2 failed and we replaced the disk. Normally the array is rebuilding and everybody is happy but not this time.

When I look in the Array Configuration Utility. The server see the replaced disk as a new unassigned disk using Port 1 ID 2. But the problem is that the server also see the failed disk at SCSI Port 1 ID 6. But this disk is not present in the server. We have done the following tasks to resolve the problem but none of them solves the problem:

- Rescan Controller
- Replaced the replaced disk with another new Disk
- Installed the latest firmware on the controller and disks

We tried to remove or add the disk using the Array configuration console client. But we receive a error that the command is not supported.

Do anyone have a suggestion what to do?

Re: ML350 Failed Disk Error replacing Disk

djjoost — Mon, 19 May 2008 13:57:50 GMT

Zelfde probleem hier (almost the same problem here).

http://forums12.itrc.hp.com/service/forums/questionanswer.do?threadId=1232780

Who can help us?

Re: ML350 Failed Disk Error replacing Disk

Evert Goor — Tue, 20 May 2008 11:50:20 GMT

Same error here. Anyone has an idea ?

Re: ML350 Failed Disk Error replacing Disk

vakantieman — Tue, 20 May 2008 11:56:25 GMT

I tried every single slot on my server and all give the same problem. Is there anyone which give us a solution?