BIOS stuck in command line

marcel gavriliu — Sat, 19 Jul 2008 14:58:04 GMT

How can one change the BIOS settings to go back to the standard menu based interaction. I followed these instructions to turn on command line:

"If the BIOS interface is in Auto mode, change it to Command Line mode as follows:
a. Press the F9 key to open RBSU when prompted during POST.
b. In RBSU, select BIOS Serial Console & EMS>BIOS Interface Mode.
c. Change the setting to Command Line.
d. Press the Esc key to exit RBSU, and then press the F10 key to confirm that you want to exit.
The server reboots, and POST runs again."

Re: BIOS stuck in command line

marcel gavriliu — Sat, 19 Jul 2008 16:10:57 GMT

Answered my own question:

Set Config Bios Interface Mode 1

http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c01155651〈=en&cc=us&taskId=101&prodSeriesId=428936&prodTypeId=15351

topic Re: BIOS stuck in command line in ProLiant Servers (ML,DL,SL)

BIOS stuck in command line

Re: BIOS stuck in command line