topic Re: ML370 G1 Windows server 2003 install in HPE ProLiant Servers (ML,DL,SL)

ML370 G1 Windows server 2003 install

Mar Imus — Fri, 08 Aug 2008 19:15:45 GMT

I am currently using WINNT4.0 on this server with 431 control card, and I like to upgrade it to Windows server 2003. Any specific Smart start CD to use. How about scsi control card? Please advice.

Re: ML370 G1 Windows server 2003 install

KarloChacon — Sat, 09 Aug 2008 03:50:25 GMT

hi

yes you can use Smartstart Cd 5.5
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&swItem=MTX-597d7cb6b45d493285e27c1412&jumpid=reg_R1002_USEN

if that does not work
you can install windows 2003 manually pressing F6 and loading this driver for your controller

HP ProLiant Smart Array-2 Controllers Driver

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=15351&prodSeriesId=254940&swItem=MTX-UNITY-I23395&prodNameId=341569&swEnvOID=1005&swLang=8&taskId=135&mode=3

regards

Re: ML370 G1 Windows server 2003 install

Mar Imus — Tue, 12 Aug 2008 19:47:30 GMT

Hello Karlo,

I downloaded the iso image and created a bootable smart start CD 5.50 per your advice. However, the smart start only takes Windows server 2000 not Windows server 2003. So, I am still stuck.

Mar

Re: ML370 G1 Windows server 2003 install

KarloChacon — Tue, 12 Aug 2008 20:24:56 GMT

even though W2003 can be installed

check this link out

http://forums11.itrc.hp.com/service/forums/questionanswer.do?threadId=1047043

regards

Re: ML370 G1 Windows server 2003 install

Mar Imus — Wed, 13 Aug 2008 18:33:25 GMT

Karlo,

SmartStart CD 5.50 resolved my problem. Thanks for your assistance.

Mar

Re: ML370 G1 Windows server 2003 install

KarloChacon — Thu, 14 Aug 2008 00:21:02 GMT

glad to hear that

and thanks for the points :-)